#
#  This program source code file is part of KICAD, a free EDA CAD application.
#
#  Copyright (C) 2007-2021 Kicad Developers, see AUTHORS.txt for contributors.
#
#  This program is free software; you can redistribute it and/or
#  modify it under the terms of the GNU General Public License
#  as published by the Free Software Foundation; either version 2
#  of the License, or (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, you may find one here:
#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
#  or you may search the http://www.gnu.org website for the version 2 license,
#  or you may write to the Free Software Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
#

cmake_minimum_required( VERSION 3.12 FATAL_ERROR )

# Default to CMAKE_BUILD_TYPE = Release unless overridden on command line
# http://www.cmake.org/pipermail/cmake/2008-September/023808.html
if( DEFINED CMAKE_BUILD_TYPE )
    set( CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE} CACHE STRING "Set to either \"Release\" or \"Debug\"" )
else()
    set( CMAKE_BUILD_TYPE Release CACHE STRING "Set to either \"Release\" or \"Debug\"" )
endif()

project( kicad )

include( GNUInstallDirs )
include( CMakeDependentOption )

# Output compile_commands.json for various LSP and other users
set( CMAKE_EXPORT_COMPILE_COMMANDS ON )

# Path to local CMake modules.
set( CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMakeModules )

# On Windows, binaries created by link option -g3 are very large (more than 1Gb for pcbnew,
# and more than 3Gb for the full kicad suite)
# This option create binaries using link option -g1 that create much smaller files, but
# there are less info in debug (but the file names and line numbers are available)
cmake_dependent_option( BUILD_SMALL_DEBUG_FILES "In debug build: create smaller binaries." OFF "NOT MSVC" OFF )


#
# KiCad build options should be added below.
#
# If you add a new build option, please add its state to the
# OnCopyVersionInfo() function in common/dialog_about/dialog_about.cpp
# so that build option settings can be included in bug reports.
#

option( KICAD_SCRIPTING_WXPYTHON
    "Build wxPython implementation for wx interface building in Python and py.shell (default ON)."
    ON )
mark_as_advanced( KICAD_SCRIPTING_WXPYTHON )

option( KICAD_USE_OCC
    "Build tools and plugins related to OpenCascade Technology (default ON)"
    ON )

option( KICAD_INSTALL_DEMOS
    "Install KiCad demos and examples (default ON)"
    ON )

option( KICAD_BUILD_QA_TESTS
    "Build software Quality assurance unit tests (default ON)"
    ON )

option( KICAD_SPICE
    "Build KiCad with internal Spice simulator."
    ON )

option( KICAD_BUILD_I18N
    "Build the translation libraries."
    OFF )

option( KICAD_I18N_UNIX_STRICT_PATH
    "Use standard Unix locale lookup path (default OFF)."
    OFF )

# Not supported by all platforms (for instance mingw)
option( KICAD_SANITIZE_ADDRESS
    "Build KiCad with sanitizer options. WARNING: Not compatible with gold linker"
    OFF )

# Not supported by all platforms (for instance mingw)
option( KICAD_SANITIZE_THREADS
    "Build KiCad with sanitizer options. WARNING: Not compatible with gold linker"
    OFF )

option( KICAD_STDLIB_DEBUG
    "Build KiCad with libstdc++ debug flags enabled."
    OFF )

option( KICAD_STDLIB_LIGHT_DEBUG
    "Build KiCad with libstdc++ with -Wp,-D_GLIBCXX_ASSERTIONS flag enabled. Not as intrusive as KICAD_STDLIB_DEBUG"
    OFF )

cmake_dependent_option( KICAD_WIN32_BUILD_PARALLEL_CL_MP
    "Build in parallel using the /MP compiler option (default OFF for safety reasons)"
    OFF "WIN32" OFF )

option( KICAD_USE_VALGRIND
    "Build KiCad with valgrind stack tracking enabled."
    OFF )

option( KICAD_NETLIST_QA
    "Run eeschema netlist QA tests (requires Python 3)"
    OFF )

cmake_dependent_option( KICAD_WIN32_DPI_AWARE
    "Turn on DPI awareness for Windows builds only"
    OFF "WIN32" OFF )

cmake_dependent_option( KICAD_WIN32_CONTEXT_WINFIBER
    "Use win32 fibers for libcontext"
    OFF "WIN32" OFF )

option( KICAD_USE_EGL
    "Build KiCad with EGL backend support for Wayland."
    OFF )

cmake_dependent_option( KICAD_USE_BUNDLED_GLEW
    "Use the bundled version of GLEW - only available when KICAD_USE_EGL is set"
    ON "KICAD_USE_EGL"
    OFF )

option( KICAD_DRC_PROTO
    "Build the DRC prototype QA tool"
    OFF )

option( KICAD_BUILD_PNS_DEBUG_TOOL
    "Build the P&S debugging/playground QA tool"
    OFF )

option( KICAD_GAL_PROFILE
    "Enable profiling info for GAL"
    OFF )

cmake_dependent_option( KICAD_WIN32_INSTALL_PDBS
    "Installs debug pdb to the bin folder, DO NOT USE (NOR REQUIRED) FOR DEBUGGING THE SOURCE ON MSVC. This is purely for release building.
    MSVC can find the PDBs without this."
    OFF "WIN32"
    OFF )

option( KICAD_STEP_EXPORT_LIB
    "Build and use kicad2step as a library, meant for debugging"
    OFF )

option( KICAD_USE_3DCONNEXION
    "Build KiCad with support for 3Dconnexion devices (Currently only for Mac/MSW)"
    OFF )

cmake_dependent_option( KICAD_WIN32_VERIFY_CODESIGN
    "When enabled, verifies the code signing signature of certain DLLs loaded during runtime."
    OFF "WIN32"
    OFF )

option( KICAD_USE_SENTRY
    "Build KiCad with support for sentry app metrics"
    OFF )

if( KICAD_USE_3DCONNEXION )
    if( WIN32 )
        add_definitions( -DKICAD_USE_3DCONNEXION )
    elseif( APPLE )
        add_definitions( -DKICAD_USE_3DCONNEXION )
    else()
        remove_definitions( -DKICAD_USE_3DCONNEXION )
    endif()
endif()

# Global setting: exports are explicit
set( CMAKE_CXX_VISIBILITY_PRESET "hidden" )
set( CMAKE_VISIBILITY_INLINES_HIDDEN ON )

# Global setting: build everything position independent
set( CMAKE_POSITION_INDEPENDENT_CODE ON )

# Global setting: Use C++17
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_CXX_EXTENSIONS OFF)
set(CMAKE_CXX_STANDARD_REQUIRED ON)

# Enable additional valgrind instrumentation for stack tracking in libcontext
if( KICAD_USE_VALGRIND )
    add_definitions( -DKICAD_USE_VALGRIND )
endif()

if( KICAD_GAL_PROFILE )
    add_definitions( -DKICAD_GAL_PROFILE )
endif()

if( KICAD_WIN32_VERIFY_CODESIGN )
    add_definitions( -DKICAD_WIN32_VERIFY_CODESIGN )
endif()

# Ensure DEBUG is defined for all platforms in Debug builds
# change to add_compile_definitions() after minimum required CMake version is 3.12
set_property( DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DEBUG> )


# Add option to add user directories for linker, if any
LINK_DIRECTORIES( ${LINK_DIRECTORIES_PATH} )

set( KICAD_CONFIG_DIR "kicad" CACHE STRING "Location of user specific KiCad config files" )
mark_as_advanced( KICAD_CONFIG_DIR )
add_definitions( -DKICAD_CONFIG_DIR=${KICAD_CONFIG_DIR} )

# Set default data file path to CMAKE_INSTALL_PREFIX if it wasn't specified during the
# CMake configuration.  The value of DEFAULT_INSTALL_PATH is expanded in config.h and
# used in the source code to define the base path for kicad search paths and environment
# variables.
if( NOT DEFAULT_INSTALL_PATH )
    set( DEFAULT_INSTALL_PATH "${CMAKE_INSTALL_PREFIX}"
         CACHE
         PATH
         "Location of KiCad data files." )
endif()

message( STATUS "KiCad install dir: <${DEFAULT_INSTALL_PATH}>" )

# Generate build system specific header file.
include( PerformFeatureChecks )
perform_feature_checks()


# Setup the compiler warnings
include( ${CMAKE_MODULE_PATH}/Warnings.cmake )

if( KICAD_WIN32_CONTEXT_WINFIBER )
    set(LIBCONTEXT_USE_WINFIBER true)
    add_compile_definitions(LIBCONTEXT_USE_WINFIBER)
else()
    set(LIBCONTEXT_USE_WINFIBER false)
endif()

if( WIN32 )
    # define UNICODE and_UNICODE definition on Windows. KiCad uses unicode.
    # Both definitions are required
    add_definitions(-DUNICODE -D_UNICODE)

    # In fully standards-compliant mode, M_PI et al. are defined only if
    # _USE_MATH_DEFINES is set.
    add_definitions( -D_USE_MATH_DEFINES )

    # Used for the resource compiler and other arch dependent steps
    if( MSVC )
        # CMake does not set CMAKE_SYSTEM_PROCESSOR correctly for MSVC
        # and it will always return the host instead of the target arch
        if("${MSVC_C_ARCHITECTURE_ID}" STREQUAL "ARM64")
            set( KICAD_BUILD_ARCH "arm64" )
            set( KICAD_BUILD_ARCH_ARM64 1 )
        elseif("${MSVC_C_ARCHITECTURE_ID}" STREQUAL "ARM")
            set( KICAD_BUILD_ARCH "arm" )
            set( KICAD_BUILD_ARCH_ARM 1 )
        elseif("${MSVC_C_ARCHITECTURE_ID}" STREQUAL "X86")
            set( KICAD_BUILD_ARCH "x86" )
            set( KICAD_BUILD_ARCH_X86 1 )
        elseif("${MSVC_C_ARCHITECTURE_ID}" STREQUAL "x64")
            set( KICAD_BUILD_ARCH "x64" )
            set( KICAD_BUILD_ARCH_X64 1 )
        else()
            message(FATAL_ERROR "Failed to determine the MSVC target architecture: ${MSVC_C_ARCHITECTURE_ID}")
        endif()
    else()
        if ( NOT CMAKE_SIZEOF_VOID_P EQUAL 8 )
            set( KICAD_BUILD_ARCH "x86" )
            set( KICAD_BUILD_ARCH_X86 1 )
        elseif( CMAKE_SIZEOF_VOID_P EQUAL 8 )
            set( KICAD_BUILD_ARCH "x64" )
            set( KICAD_BUILD_ARCH_X64 1 )
        endif()
    endif()

    add_definitions( -DKICAD_BUILD_ARCH=${KICAD_BUILD_ARCH} )

    if( KICAD_WIN32_DPI_AWARE )
        add_definitions( -DKICAD_WIN32_DPI_AWARE=1 )
    endif()
endif()

if(KICAD_BUILD_ARCH_X64)
    add_definitions( -DKICAD_BUILD_ARCH_X64 )
elseif(KICAD_BUILD_ARCH_X86)
    add_definitions( -DKICAD_BUILD_ARCH_X86 )
elseif(KICAD_BUILD_ARCH_ARM64)
    add_definitions( -DKICAD_BUILD_ARCH_ARM64 )
elseif(KICAD_BUILD_ARCH_ARM)
    add_definitions( -DKICAD_BUILD_ARCH_ARM )
endif()

#================================================
# Provide access to CCACHE
#================================================
if (USE_CCACHE)
  find_program(CCACHE_FOUND ccache)
  if(CCACHE_FOUND)
    get_property(RULE_LAUNCH_COMPILE GLOBAL PROPERTY RULE_LAUNCH_COMPILE)
    set(RULE_LAUNCH_COMPILE "${RULE_LAUNCH_COMPILE} ${CCACHE_FOUND}")
    set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE ${RULE_LAUNCH_COMPILE})

    get_property(RULE_LAUNCH_LINK GLOBAL PROPERTY RULE_LAUNCH_LINK)
    set(RULE_LAUNCH_LINK "${RULE_LAUNCH_LINK} ${CCACHE_FOUND}")
    set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK ${RULE_LAUNCH_LINK})

    message(STATUS "Used ${CCACHE_FOUND} for compilation.")
  else(CCACHE_FOUND)
    message(STATUS "CCache was requested but not found.")
  endif(CCACHE_FOUND)
endif(USE_CCACHE)


#================================================
# Provide access to DISTCC
#================================================
if (USE_DISTCC)
  find_program(DISTCC_FOUND distcc)
  if(DISTCC_FOUND)
    get_property(RULE_LAUNCH_COMPILE GLOBAL PROPERTY RULE_LAUNCH_COMPILE)
    set(RULE_LAUNCH_COMPILE "${RULE_LAUNCH_COMPILE} ${DISTCC_FOUND}")
    set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE ${RULE_LAUNCH_COMPILE})
    message(STATUS "Using ${DISTCC_FOUND} for distributed build.")
  else(DISTCC_FOUND)
    message(INFO "Distcc was requested but not found.")
  endif(DISTCC_FOUND)
endif(USE_DISTCC)


#================================================
# Set flags for GCC, or treat llvm as GCC
#================================================

if( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )

    # Set 32-bit flag for GCC to prevent excess precision
    if( CMAKE_SIZEOF_VOID_P EQUAL 4 )
        set( CMAKE_CXX_FLAGS "-ffloat-store ${CMAKE_CXX_FLAGS}" )
    endif()

    # Link flags in Debug: -g1 and -ggdb1 or -g1 and -ggdb3 can be used.
    # Level 1 produces minimal information, enough for making basic backtraces.
    # This includes descriptions of functions and external variables, and line number tables,
    # but no information about local variables.
    # Level 3 includes full information, but binaries are much larger.
    if( BUILD_SMALL_DEBUG_FILES )
        set( CMAKE_C_FLAGS_DEBUG   "-g1 -ggdb1" )
        set( CMAKE_CXX_FLAGS_DEBUG "-g1 -ggdb1" )
    else()
        set( CMAKE_C_FLAGS_DEBUG   "-g3 -ggdb3" )
        set( CMAKE_CXX_FLAGS_DEBUG "-g3 -ggdb3" )
    endif()

    if( KICAD_SANITIZE_ADDRESS )
        add_definitions( -DKICAD_SANITIZE_ADDRESS )
        set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GLIBCXX_SANITIZE_VECTOR -fsanitize=address -fno-optimize-sibling-calls -fsanitize-address-use-after-scope -fno-omit-frame-pointer" )

        # ASAN shouldn't be used with these options (https://github.com/google/sanitizers/wiki/AddressSanitizer#faq)
        set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-stack-protector -U_FORTIFY_SOURCE" )
    endif()

    if( KICAD_SANITIZE_THREADS )
        add_definitions( -DKICAD_SANITIZE_THREADS )
        set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -D_GLIBCXX_SANITIZE_VECTOR -fsanitize=thread -fno-optimize-sibling-calls -fno-omit-frame-pointer" )

        # Based on this warning https://github.com/JuliaLang/julia/blob/29d5158d27ddc3983ae2e373c4cd05569b9ead6c/src/julia.h#L77
        if( CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 11 )
            message( WARNING "Clang version 11 and below may leak memory when running the thread sanitizer.\n"
                             "Be careful when using this compiler.")
        endif()

        # Just duplicate the same flags as ASAN here, because why not.
        set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-stack-protector -U_FORTIFY_SOURCE" )
    endif()

    if( KICAD_STDLIB_DEBUG )
        add_definitions( -DKICAD_STDLIB_DEBUG )
        set( CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -D_GLIBCXX_DEBUG" )
    elseif( KICAD_STDLIB_LIGHT_DEBUG )
        # useless if KICAD_STDLIB_DEBUG is ON.
        # this option makes some controls to trap out of bound memory access.
        add_definitions( -DKICAD_STDLIB_LIGHT_DEBUG )
        set( CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wp,-D_GLIBCXX_ASSERTIONS" )
    endif()

    if( MINGW )
        list(APPEND mingw_resource_compiler_INCLUDE_DIRS ${CMAKE_SOURCE_DIR}/resources/msw/ )
        # include dir to allow getting the version header
        list(APPEND mingw_resource_compiler_INCLUDE_DIRS ${CMAKE_BINARY_DIR}/ )
        list(APPEND mingw_resource_compiler_DEFINES KICAD_BUILD_ARCH=${KICAD_BUILD_ARCH} )
        if( KICAD_WIN32_DPI_AWARE )
            list(APPEND mingw_resource_compiler_DEFINES KICAD_WIN32_DPI_AWARE=1 )
        endif()

        set( CMAKE_EXE_LINKER_FLAGS_RELEASE "-s" )

        # Since version 2.8.5, Cmake uses a response file (.rsp) to
        # pass the list of include paths to gcc
        # unfortunately, under mingw32+msys, at least with gcc 4.8 and previous,
        # this file is not always expanded and in this case include paths defined in this file
        # are not taken in account ( this is the case of wxWidgets includes )
        # If it is the case, disable this response file for includes ( See Windows-GNU.cmake module )
        if( false ) #set to true to disable the include response file
            if( WIN32 AND MSYS AND NOT CMAKE_CROSSCOMPILING )
                # fixme: it is needed only with MSYS+MINGW32? or always under MINGW
                if( ${CMAKE_SIZEOF_VOID_P} MATCHES 4 )
                    set( CMAKE_CXX_USE_RESPONSE_FILE_FOR_INCLUDES 0 )
                endif()
            endif()
        endif()

        # for some reasons, cmake does do use always a response file to send the list of objects
        # to the archiver, and because this list can be very long, and can create issue
        # when it is used in a command line, force use of a response file to store it
        SET( CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1 )

        # The MinGW compiler can use the microsoft system snprintf as standard and it has a broken
        # API with respect to the C99 standard, so make sure we force it to use its own compliant
        # snprintf
        add_definitions(-D__USE_MINGW_ANSI_STDIO=1)

        # Allow linking for Boost for the UUID against bcrypt
        set( EXTRA_LIBS "bcrypt" )
    endif()

    if( APPLE )
        set( CMAKE_LD_FLAGS "${CMAKE_LD_FLAGS} -headerpad_max_install_names") # needed by fixbundle
    endif()

endif( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )

if( MSVC )
    include_directories( ${CMAKE_SOURCE_DIR}/resources/msw/ )

    # Disallow implicit linking for Boost
    add_definitions( -DBOOST_ALL_NO_LIB )
    # But allow it for the UUID so that it will link against bcrypt
    add_definitions( -DBOOST_UUID_FORCE_AUTO_LINK )
    # Disable MSVC's deprecation warnings
    add_definitions( -D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE -D_SCL_SECURE_NO_WARNINGS )
    # Hide Windows's min() and max() macros
    add_definitions( -DNOMINMAX )
    # source and execution charset are UTF-8
    string( APPEND CMAKE_CXX_FLAGS " /utf-8" )
    # C4290: throw() is interpreted as declspec(nothrow)
    string( APPEND CMAKE_CXX_FLAGS " /wd4290" )
    # C4800: non-bool is explicitly cast to bool, forcing value of 0 or 1
    string( APPEND CMAKE_CXX_FLAGS " /wd4800" )
    # /Zi: create PDB
    string( APPEND CMAKE_CXX_FLAGS " /Zi" )
    # /GF: enable string pooling
    string( APPEND CMAKE_CXX_FLAGS_RELEASE " /GF" )
    string( APPEND CMAKE_CXX_FLAGS_RELWITHDEBINFO " /GF" )
    # /Gy: Enable Function-Level Linking
    string( APPEND CMAKE_CXX_FLAGS_RELEASE " /Gy" )
    string( APPEND CMAKE_CXX_FLAGS_RELWITHDEBINFO " /Gy" )
    # Avoid fatal error because /GF + swig wrapper exceed standard obj file limits
    string( APPEND CMAKE_CXX_FLAGS " /bigobj" )

    # Exception handling
    # Remove the potential default EHsc option cmake doesn't allow us to remove easily
    string( REPLACE "/EHsc" "" CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS} )
    if( KICAD_WIN32_CONTEXT_WINFIBER )
    # /EHsc: ensure standard exception C++ unwinding is enabled, "extern C" can never throw exceptions
    string( APPEND CMAKE_CXX_FLAGS " /EHsc" )
    else()
    # the asm libcontext implementation a slight change of rules
    # /EHs: ensure standard exception C++ unwinding is enabled, "extern C" MAY throw exceptions
    string( APPEND CMAKE_CXX_FLAGS " /EHs" )
    endif()

    foreach( type EXE SHARED MODULE)
        # /DEBUG: create PDB
        string( APPEND CMAKE_${type}_LINKER_FLAGS " /DEBUG /MANIFEST:NO" )
        # /OPT:REF: omit unreferenced code
        string( APPEND CMAKE_${type}_LINKER_FLAGS_RELEASE " /OPT:REF /MANIFEST:NO" )
        string( APPEND CMAKE_${type}_LINKER_FLAGS_RELWITHDEBINFO " /OPT:REF /MANIFEST:NO" )
        # /OPT:ICF: fold common data
        string( APPEND CMAKE_${type}_LINKER_FLAGS_RELEASE " /OPT:ICF /MANIFEST:NO" )
        string( APPEND CMAKE_${type}_LINKER_FLAGS_RELWITHDEBINFO " /OPT:ICF /MANIFEST:NO" )
    endforeach()

    # Let cl.exe parallelize builds
    if( KICAD_WIN32_BUILD_PARALLEL_CL_MP )
        string( APPEND CMAKE_CXX_FLAGS " /MP" )
    endif()
endif()

if( KICAD_SCRIPTING_WXPYTHON )
    add_definitions( -DKICAD_SCRIPTING_WXPYTHON )
endif()

if( KICAD_SPICE )
    add_definitions( -DKICAD_SPICE )
endif()

if( KICAD_USE_OCC )
    add_definitions( -DKICAD_USE_OCC )
endif()

if( KICAD_USE_EGL AND UNIX AND NOT APPLE )
    message( STATUS "Configuring KiCad for the wxGLCanvas EGL backend" )
    add_definitions( -DKICAD_USE_EGL )
elseif( KICAD_USE_EGL )
    message( STATUS "Ignoring KICAD_USE_EGL since not on Linux" )
endif()

# KIFACE_SUFFIX is the file extension used for top level program modules which
# implement the KIFACE interface.  A valid suffix starts with a period '.'.

if( WIN32 )
    # We use .kiface extension so we don't collide with python DSO. (Linux/mac issue?)
    # Windows works fine with the native dll extension
    # which also resolves metadata issues because windows wants to see the dll extension
    set( KIFACE_SUFFIX  ${CMAKE_SHARED_MODULE_SUFFIX} )
else()
    # Temporary situation until we can dovetail the python DSO into the kiface DSO.
    set( KIFACE_SUFFIX  ".kiface" )
endif()

# KIFACE_PREFIX is a basename prefix used for top level program modules which
# implement the KIFACE.
set( KIFACE_PREFIX  "_" )
#message( STATUS "KIFACE_SUFFIX:${KIFACE_SUFFIX}  KIFACE_PREFIX:${KIFACE_PREFIX}" )


#================================================
# Locations for install targets.
#================================================
if( NOT APPLE )
    # Everything without leading / is relative to CMAKE_INSTALL_PREFIX.
    set( KICAD_BIN bin
        CACHE PATH "Location of KiCad binaries." )

    # Do not make these variables "PATH" b/c cmake will truncate them and we need the full path
    if( NOT IS_ABSOLUTE ${CMAKE_INSTALL_DATADIR} )
        set( KICAD_DATA ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_DATADIR}/kicad
            CACHE STRING "Location of KiCad data files." )
        set( KICAD_DOCS ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_DATADIR}/doc/kicad
            CACHE STRING "Location of KiCad documentation files." )
    else()
        set( KICAD_DATA ${CMAKE_INSTALL_DATADIR}/kicad
            CACHE STRING "Location of KiCad data files." )
        set( KICAD_DOCS ${CMAKE_INSTALL_DATADIR}/doc/kicad
            CACHE STRING "Location of KiCad documentation files." )
    endif()

    set( KICAD_LIBRARY_DATA ${KICAD_DATA}
        CACHE STRING "Location of KiCad stock EDA library data" )

    if( WIN32 )
        set( KICAD_PLUGINS ${KICAD_BIN}/scripting/plugins
            CACHE PATH "Location of KiCad plugins." )

        set( KICAD_LIB ${KICAD_BIN}
            CACHE PATH "Location of KiCad shared objects" )

        set( KICAD_USER_PLUGIN ${KICAD_BIN}/plugins
            CACHE PATH "Location of KiCad user-loaded plugins" )
    else()
        set( KICAD_PLUGINS ${KICAD_DATA}/plugins
            CACHE PATH "Location of KiCad plugins." )

        set( KICAD_LIB ${CMAKE_INSTALL_LIBDIR}
            CACHE PATH "Location of KiCad shared objects" )

        set( KICAD_USER_PLUGIN ${CMAKE_INSTALL_LIBDIR}/kicad/plugins
            CACHE PATH "Location of KiCad user-loaded plugins" )
    endif()

    set( KICAD_DEMOS ${KICAD_DATA}/demos
        CACHE PATH "Location of KiCad demo files." )
    set( KICAD_TEMPLATE ${KICAD_LIBRARY_DATA}/template
        CACHE PATH "Location of KiCad template files." )
else()
    # everything without leading / is relative to CMAKE_INSTALL_PREFIX.
    # CMAKE_INSTALL_PREFIX is root of .dmg image
    set( KICAD_BIN ${CMAKE_INSTALL_PREFIX}
        CACHE PATH "Location of KiCad binaries." FORCE )

    # some paths to single app bundle
    set( OSX_BUNDLE_MAIN "KiCad.app" )
    set( OSX_BUNDLE_BIN_DIR "Contents/MacOS" )
    set( OSX_BUNDLE_LIB_DIR "Contents/Frameworks" )
    set( OSX_BUNDLE_KIFACE_DIR "Contents/PlugIns" )
    set( OSX_BUNDLE_SUP_DIR "Contents/SharedSupport" )
    set( OSX_BUNDLE_APP_DIR "Contents/Applications" )
    set( OSX_BUNDLE_BUILD_DIR "${CMAKE_BINARY_DIR}/kicad/${OSX_BUNDLE_MAIN}" )
    set( OSX_BUNDLE_BUILD_BIN_DIR "${OSX_BUNDLE_BUILD_DIR}/${OSX_BUNDLE_BIN_DIR}" )
    set( OSX_BUNDLE_BUILD_LIB_DIR "${OSX_BUNDLE_BUILD_DIR}/${OSX_BUNDLE_LIB_DIR}" )
    set( OSX_BUNDLE_BUILD_KIFACE_DIR "${OSX_BUNDLE_BUILD_DIR}/${OSX_BUNDLE_KIFACE_DIR}" )
    set( OSX_BUNDLE_BUILD_PLUGIN_DIR "${OSX_BUNDLE_BUILD_DIR}/${OSX_BUNDLE_KIFACE_DIR}" )
    set( OSX_BUNDLE_INSTALL_DIR "${KICAD_BIN}/${OSX_BUNDLE_MAIN}" )
    set( OSX_BUNDLE_INSTALL_BIN_DIR "${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_BIN_DIR}" )
    set( OSX_BUNDLE_INSTALL_LIB_DIR "${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_LIB_DIR}" )
    set( OSX_BUNDLE_INSTALL_KIFACE_DIR "${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_KIFACE_DIR}" )
    set( OSX_BUNDLE_INSTALL_PLUGIN_DIR "${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_KIFACE_DIR}" )

    # everything provided with the application bundle goes into
    # KiCad.app/Contents/SharedSupport => accessible via GetDataDir()
    # everything else to the .dmg image
    set( KICAD_DATA ${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_SUP_DIR}
        CACHE PATH "Location of KiCad data files." FORCE )
    set( KICAD_LIB ${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_LIB_DIR}
        CACHE PATH "Location of KiCad shared objects" FORCE )
    set( KICAD_USER_PLUGIN ${OSX_BUNDLE_INSTALL_PLUGIN_DIR}
        CACHE PATH "Location of KiCad user-loaded plugins" FORCE )
    set( KICAD_TEMPLATE ${KICAD_DATA}/template
        CACHE PATH "Location of KiCad template files." FORCE )
    set( KICAD_PLUGINS ${KICAD_DATA}/plugins
        CACHE PATH "Location of KiCad plugins." FORCE )
    set( KICAD_DOCS doc
        CACHE PATH "Location of KiCad documentation files." FORCE )
    set( KICAD_DEMOS demos
        CACHE PATH "Location of KiCad demo files." FORCE )

    # RPATH settings for building shared libraries
    set( CMAKE_MACOSX_RPATH FALSE )

    # Override default paths for fixup_bundle
    set( OSX_BUNDLE_OVERRIDE_PATHS "
        function( gp_item_default_embedded_path_override item default_embedded_path_var )
            # by default, embed things right next to the main bundle executable:
            set( path \"@executable_path/../../Contents/MacOS\" )
            set( overridden 0 )

            # embed .dylibs right next to the main bundle executable:
            if( item MATCHES \"\\\\.dylib$\" )
                set( path \"@executable_path/../Frameworks\" )
                set( overridden 1 )
            endif()

            set( \${default_embedded_path_var} \"\${path}\" PARENT_SCOPE )
        endfunction(gp_item_default_embedded_path_override)

        # If `BU_CHMOD_BUNDLE_ITEMS` is not set, `install_name_tool` will fail to re-write some
        # loader paths due to lack of writable permissions if the build dependencies were installed
        # by brew (or didn't have writable permissions)
        set ( BU_CHMOD_BUNDLE_ITEMS ON )
        "
        )
endif()

mark_as_advanced( KICAD_BIN
    KICAD_PLUGINS
    KICAD_USER_PLUGIN
    KICAD_LIB
    KICAD_DATA
    KICAD_LIBRARY_DATA
    KICAD_DOCS
    KICAD_DEMOS
    KICAD_TEMPLATE )

include( Functions )

include( ExternalProject )

#================================================
# Find libraries that are needed to build KiCad.
#================================================
include( CheckFindPackageResult )

if( KICAD_BUILD_I18N )
    find_package( Gettext REQUIRED )
endif()

#
# Find OpenGL library, required
#
set( OpenGL_GL_PREFERENCE "LEGACY" )     # CMake 3.11+ setting; see 'cmake --help-policy CMP0072'
find_package( OpenGL REQUIRED )

#
# Find GLEW library, required
#
# The EGL canvas on GTK requires the use of a GLEW version compiled with an EGL flag.
# The one built in the thirdparty directory has the flag for EGL set, so we use it unless told
# otherwise. Then we search for the system GLEW version and use that instead.
#
if( KICAD_USE_EGL AND KICAD_USE_BUNDLED_GLEW AND UNIX AND NOT APPLE )
    if( OpenGL_EGL_FOUND )
        message( STATUS "Found OpenGL EGL library: ${OPENGL_egl_LIBRARY}" )
    else()
        message( FATAL_ERROR "OpenGL EGL library not found" )
    endif()

    # Add the custom GLEW target
    add_subdirectory( thirdparty/glew )

    # Set the standard package variables to point to our custom target to mimic the system version.
    set( GLEW_LIBRARIES glew )
    set( GLEW_FOUND TRUE )
    include_directories( SYSTEM $<TARGET_PROPERTY:glew,INCLUDE_DIRECTORIES> )
else()
    find_package( GLEW REQUIRED )
    check_find_package_result( GLEW_FOUND "GLEW" )
    include_directories( SYSTEM ${GLEW_INCLUDE_DIR} )
endif()

#
# Find GLM library, required
#
find_package( GLM 0.9.8 REQUIRED )
add_definitions( -DGLM_FORCE_CTOR_INIT )
include_directories( SYSTEM ${GLM_INCLUDE_DIR} )

#
# Find zlib library, required
#
find_package(ZLIB REQUIRED)
check_find_package_result( ZLIB_FOUND "ZLIB" )
include_directories( SYSTEM ${ZLIB_INCLUDE_DIRS} )

#
# Find CURL library, required
#
find_package( CURL REQUIRED )
include_directories( SYSTEM ${CURL_INCLUDE_DIRS} )

#
# Find Cairo library, required
#
find_package( Cairo 1.12 REQUIRED )
include_directories( SYSTEM ${CAIRO_INCLUDE_DIR} )

find_package( Pixman 0.30 REQUIRED )
include_directories( SYSTEM ${PIXMAN_INCLUDE_DIR} )

#
# Find Boost headers, required.
find_package( Boost 1.71.0 REQUIRED )
include_directories( SYSTEM ${Boost_INCLUDE_DIR} )

#
# Libraries required for outline font support.
if( MSVC )
# Earlier than 2.11.1 contain a crash bug specific to MSVC built freetype
set( FREETYPE_MIN_VERSION 2.11.1 )
endif()

find_package( Freetype ${FREETYPE_MIN_VERSION} REQUIRED )
include_directories( SYSTEM ${FREETYPE_INCLUDE_DIRS} )

find_package( HarfBuzz REQUIRED )
include_directories( SYSTEM ${HarfBuzz_INCLUDE_DIRS} )

find_package( Fontconfig REQUIRED )

# Include MinGW resource compiler.
include( MinGWResourceCompiler )

if( WIN32 )
    # we need the gdiplus library for cairo printing on windows
    set( GDI_PLUS_LIBRARIES gdiplus )
endif()

# Find ngspice library, required for integrated circuit simulator
if( KICAD_SPICE )
    find_package( ngspice REQUIRED )
endif()

# Find OpenCascade, required for STEP plugin and tools
if( KICAD_USE_OCC )
    find_package(OCC)
    if( NOT OCC_FOUND )
        MESSAGE( FATAL_ERROR "================================================================\n"
                             " KICAD_USE_OCC=True but OpenCASCADE was not found!\n"
                             "================================================================\n")
    endif()
    if( OCC_VERSION_STRING VERSION_LESS 7.3.0 )
        MESSAGE( FATAL_ERROR "================================================================\n"
                             "OpenCASCADE version ${OCC_VERSION_STRING} was found.\n"
                             "  KiCad requires a minimum version of 7.3.0\n"
                             "================================================================\n")
    endif()
    include_directories( SYSTEM ${OCC_INCLUDE_DIR} )
endif()

# Assist with header file searching optimization:
# INC_BEFORE and INC_AFTER are two lists which go at the front and back of the
# header file search lists, respectively.
# INC_BEFORE is for use with "include_directories( BEFORE ...)", which _reverses_
# the order during insertion.  (So put first wanted last, which is
# ${CMAKE_SOURCE_DIR/include.)  Use '.' for current source dir since
# we don't want expansion here and now, which would happen if using ${CMAKE_CURRENT_SOURCE_DIR}.
# Instead we use '.' which is applicable to any source directory below here as a result of
# this lack of expansion.
set( INC_BEFORE
    .
    ${CMAKE_SOURCE_DIR}/include
    )

set( INC_AFTER
    ${CMAKE_BINARY_DIR}
    )

#
# Find Python and other scripting resources
#

# SWIG 3.0 or later require for C++11 support.
find_package( SWIG 3.0 REQUIRED )
include( ${SWIG_USE_FILE} )

set( PythonInterp_FIND_VERSION 3.6 )
set( PythonLibs_FIND_VERSION 3.6 )

find_package( PythonInterp ${PythonInterp_FIND_VERSION} )

check_find_package_result( PYTHONINTERP_FOUND "Python Interpreter" )

# Get the correct Python site package install path from the Python interpreter found by
# FindPythonInterp unless the user specifically defined a custom path.
if( NOT PYTHON_SITE_PACKAGE_PATH )
    execute_process( COMMAND ${PYTHON_EXECUTABLE} -c "import distutils.sysconfig;print(\"%s\"%distutils.sysconfig.get_python_lib(plat_specific=0, standard_lib=0, prefix=''))"
        OUTPUT_VARIABLE PYTHON_SITE_PACKAGE_PATH
        OUTPUT_STRIP_TRAILING_WHITESPACE
        )

    if( NOT PYTHON_SITE_PACKAGE_PATH )
        message( FATAL_ERROR "Error occurred while attempting to find the Python site library path." )
    endif()
endif()

if( APPLE )
    set( OSX_BUNDLE_PYTHON_SITE_PACKAGES_DIR ${OSX_BUNDLE_LIB_DIR}/Python.framework/Versions/${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR}/lib/python${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR}/site-packages)
    set( OSX_BUNDLE_INSTALL_PYTHON_SITE_PACKAGES_DIR "${OSX_BUNDLE_INSTALL_DIR}/${OSX_BUNDLE_PYTHON_SITE_PACKAGES_DIR}")
    set( PYTHON_DEST "${OSX_BUNDLE_BUILD_DIR}/${OSX_BUNDLE_PYTHON_SITE_PACKAGES_DIR}"
        CACHE PATH "Python module install path."
        )
    # change to add_compile_definitions() after minimum required CMake version is 3.12
    set_property( DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS OSX_BUNDLE_PYTHON_SITE_PACKAGES_DIR="${OSX_BUNDLE_PYTHON_SITE_PACKAGES_DIR}")
elseif( VCPKG_TOOLCHAIN )
    set( PYTHON_DEST "${CMAKE_INSTALL_PREFIX}/bin/Lib/site-packages"
        CACHE PATH "Python module install path."
        )
else()
    set( PYTHON_DEST "${PYTHON_SITE_PACKAGE_PATH}"
        CACHE PATH "Python module install path."
        )
endif()
message( STATUS "Python module install path: ${PYTHON_DEST}" )

find_package( PythonLibs 3.6 REQUIRED )

# pybind11 is header-only, so include the subdir
add_subdirectory(thirdparty/pybind11)

# Make sure that we get our pybind11 and not the system pybind11 (ours is patched to work with wx)
include_directories( BEFORE SYSTEM ${PYBIND11_INCLUDE_DIR} )

# Infrequently needed headers go at end of search paths, append to INC_AFTER which
# although is used for all components, should be a harmless hit for something like eeschema
# so long as unused search paths are at the end like this.
set( INC_AFTER ${INC_AFTER} ${PYTHON_INCLUDE_DIRS} ${CMAKE_CURRENT_SOURCE_DIR}/scripting )


if( KICAD_SCRIPTING_WXPYTHON )
    # Find the wxPython installation
    find_package( wxPython REQUIRED )

    if( WXPYTHON_VERSION VERSION_LESS 4.0.0 )
        message( FATAL_ERROR "wxPython Phoenix is required" )
    endif()
endif()

# GTK3 is required on Linux
if( UNIX AND NOT APPLE AND KICAD_SCRIPTING_WXPYTHON )
    if( NOT "${WXPYTHON_TOOLKIT}" STREQUAL "gtk3" )
        message( FATAL_ERROR "GTK3-based wxPython/Phoenix toolkit is required.")
    endif()
endif()

if( WXPYTHON_FLAVOR )
    message( STATUS "Found wxPython ${WXPYTHON_FLAVOR} "
        "${WXPYTHON_VERSION}/${WXPYTHON_TOOLKIT} "
        "(wxWidgets ${WXPYTHON_WXVERSION})" )
endif()

#
# Find wxWidgets library, required
#

# Turn on wxWidgets compatibility mode for some classes
add_definitions( -DWX_COMPATIBILITY )


# Check if '--toolkit=xxx' option has been passed
string( REGEX MATCH "--toolkit=([a-zA-Z0-9]+)"
    WXWIDGETS_REQUESTED_TOOLKIT "${wxWidgets_CONFIG_OPTIONS}" )

if( WXWIDGETS_REQUESTED_TOOLKIT
        AND NOT WXWIDGETS_REQUESTED_TOOLKIT STREQUAL "--toolkit=${WXPYTHON_TOOLKIT}" )
    message( WARNING "wxWidgets and wxPython must be based on the same toolkit.\n"
        "It will be fixed automatically if you skip the '--toolkit=xxx' "
        "wxWidgets_CONFIG_OPTIONS parameter.")
elseif( UNIX AND NOT APPLE )
    # Force the use of GTK3 on Linux
    set( wxWidgets_CONFIG_OPTIONS ${wxWidgets_CONFIG_OPTIONS} "--toolkit=gtk3" )
else()
    # Use the same toolkit as wxPython otherwise there will be a symbol conflict
    set( wxWidgets_CONFIG_OPTIONS ${wxWidgets_CONFIG_OPTIONS} "--toolkit=${WXPYTHON_TOOLKIT}" )
endif()

# Require the same wxWidgets version as is used by wxPython
set( wxWidgets_REQ_VERSION ${WXPYTHON_WXVERSION} )

# See line 49 of CMakeModules/FindwxWidgets.cmake
set( wxWidgets_CONFIG_OPTIONS ${wxWidgets_CONFIG_OPTIONS} --static=no )

find_package( wxWidgets ${wxWidgets_REQ_VERSION} COMPONENTS gl aui adv html core net base propgrid xml stc richtext REQUIRED )

# Include wxWidgets macros.
include( ${wxWidgets_USE_FILE} )

if( MINGW )
    # This needs to be on a separate line to protect against a broken FindWxWidgets.cmake in vcpkg
    if( ${wxWidgets_VERSION_STRING} VERSION_LESS 3.1 )
        # Work around a bug in wx < 3.1 -- when wx itself is compiled with
        # compiler extensions enabled, it assumes these are also available for
        # applications.
        add_definitions( -U__STRICT_ANSI__ )
    endif()
endif()

if( APPLE )
    # Remove app bundles in ${KICAD_BIN} before installing anything new.
    # Must be defined before all includes so that it is executed first.
    install( CODE "
            message( STATUS \"Removing existing application bundles...\" )
            # Remove links to standalone apps
            file( REMOVE \"${KICAD_BIN}/Bitmap2Component.app\" )
            file( REMOVE \"${KICAD_BIN}/Eeschema.app\" )
            file( REMOVE \"${KICAD_BIN}/GerbView.app\" )
            file( REMOVE \"${KICAD_BIN}/PCB Calculator.app\" )
            file( REMOVE \"${KICAD_BIN}/Pcbnew.app\" )
            file( REMOVE \"${KICAD_BIN}/Page Layout Editor.app\" )
            # Remove main bundle
            file( REMOVE_RECURSE ${KICAD_BIN}/${OSX_BUNDLE_MAIN} )
        " COMPONENT Runtime
        )
endif()


if( KICAD_USE_SENTRY )
    add_subdirectory( thirdparty/sentry-native )
    add_definitions( -DKICAD_USE_SENTRY )
endif()

#================================================
# Add the documentation
#================================================
find_package( Doxygen )

add_subdirectory( Documentation )

# Generate config.h.
configure_file( ${PROJECT_SOURCE_DIR}/CMakeModules/config.h.cmake
    ${CMAKE_BINARY_DIR}/config.h )

###
# Generate Map file
###
if( KICAD_MAKE_LINK_MAPS )
    # Currently only works on linux/gcc
    if( UNIX AND NOT APPLE )
        set( MAKE_LINK_MAPS true )
    else()
        set( MAKE_LINK_MAPS false )
    endif()
endif()

#================================================
# "make uninstall" rules
#================================================
configure_file(
    "${CMAKE_MODULE_PATH}/cmake_uninstall.cmake.in"
    "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
    IMMEDIATE @ONLY )

add_custom_target( uninstall
    "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" )


#================================================
# Installation
#================================================

###
# Install scripts
###
if( UNIX AND NOT APPLE )
    install( DIRECTORY scripts
        DESTINATION ${KICAD_DOCS}
        COMPONENT resources
        PATTERN "*.bat" EXCLUDE
        )
endif()


include( CTest )
enable_testing()

if( UNIX AND NOT APPLE )

    # Create a *.deb file:
    set( CPACK_GENERATOR "DEB" )
    set( CPACK_DEBIAN_PACKAGE_MAINTAINER "http://launchpad.net/kicad" )

    set( CPACK_PACKAGE_VERSION_MAJOR 1 )
    set( CPACK_PACKAGE_VERSION_MINOR 0 )
    set( CPACK_PACKAGE_VERSION_PATCH 0 )
    #set( CPACK_PACKAGE_CONTACT Firstname Lastname <email@company.com> )
    set( CPACK_PACKAGE_DESCRIPTION_SUMMARY "KiCad built by CMake build system." )

    include( CPack )

endif()

#================================================
# Let CMake look in these directories for nested
# 'CMakeLists.txt' files to process
#================================================

# Binaries ( CMake targets )
add_subdirectory( resources )
add_subdirectory( thirdparty )
add_subdirectory( bitmaps_png )
add_subdirectory( libs )
add_subdirectory( scripting )
add_subdirectory( common )
add_subdirectory( 3d-viewer )
add_subdirectory( eeschema )
add_subdirectory( gerbview )
add_subdirectory( pcbnew )
add_subdirectory( pagelayout_editor )
add_subdirectory( bitmap2component )
add_subdirectory( pcb_calculator )
add_subdirectory( plugins )             # 3D plugins must be built before kicad
add_subdirectory( cvpcb )               # must be after pcbnew
add_subdirectory( kicad )               # should follow pcbnew, eeschema
add_subdirectory( tools )
add_subdirectory( utils )

if( KICAD_BUILD_QA_TESTS )
    add_subdirectory( qa )
endif()

# Demos
if( KICAD_INSTALL_DEMOS )
    add_subdirectory( demos )
endif ( KICAD_INSTALL_DEMOS )

# I18n Translations
if( KICAD_BUILD_I18N )
    add_subdirectory( translation )
endif()

add_subdirectory( template )