代码拉取完成,页面将自动刷新
/*----------------------------------------------------------------------------
* Copyright (c) Huawei Technologies Co., Ltd. 2013-2021. All rights reserved.
* Description: LiteOS Kernel Interrupt Demo Implementation
* Author: Huawei LiteOS Team
* Create: 2013-01-01
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific prior written
* permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* --------------------------------------------------------------------------- */
#include "los_api_interrupt.h"
#include "los_hwi.h"
#ifdef LOSCFG_PLATFORM_STM32F429IGTX
#include "stm32f4xx_hal.h"
#endif
#include "los_inspect_entry.h"
#ifdef __cplusplus
#if __cplusplus
extern "C" {
#endif /* __cplusplus */
#endif /* __cplusplus */
#ifdef LOSCFG_ARCH_CSKY_V2
#define SOFT_IRQ_NUM 31
#elif defined LOSCFG_ARCH_RISCV_RV32IMC
#define SOFT_IRQ_NUM 3
#elif defined (LOSCFG_FAMILY_RASPBERRY)
#define SOFT_IRQ_NUM RASPBERRY_IRQ
#elif defined (LOSCFG_PLATFORM_ESP32) || (LOSCFG_PLATFORM_ESP8266) || (LOSCFG_PLATFORM_ESP32_QEMU)
#define SOFT_IRQ_NUM 7
#else
#define SOFT_IRQ_NUM 39
#endif
#define BUTTON_IRQ_NUM (EXTI0_IRQn + 16)
#ifdef LOSCFG_PLATFORM_STM32F429IGTX
STATIC VOID Exti0Init(VOID)
{
/* add your IRQ init code here */
GPIO_InitTypeDef GPIO_InitStructure;
__GPIOA_CLK_ENABLE();
GPIO_InitStructure.Pin = GPIO_PIN_0;
GPIO_InitStructure.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStructure.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
return;
}
STATIC VOID ButtonIrqHandler(VOID)
{
printf("Button IRQ test successfully.\n");
LOS_HwiClear(BUTTON_IRQ_NUM);
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_0);
InspectStatusSetById(LOS_INSPECT_INTERRUPT, LOS_INSPECT_STU_SUCCESS);
return;
}
#endif
STATIC VOID UserIrqHandler(VOID)
{
printf("User IRQ test successfully.\n");
LOS_HwiClear(SOFT_IRQ_NUM);
InspectStatusSetById(LOS_INSPECT_INTERRUPT, LOS_INSPECT_STU_SUCCESS);
return;
}
UINT32 InterruptDemo(VOID)
{
UINTPTR intSave = LOS_IntLock();
printf("Kernel interrupt demo start to run.\n");
/* software interrupt test */
LOS_HwiCreate(SOFT_IRQ_NUM, 0, 0, UserIrqHandler, 0);
LOS_HwiEnable(SOFT_IRQ_NUM);
LOS_IntRestore(intSave);
LOS_HwiTrigger(SOFT_IRQ_NUM);
/* hardware interrupt test */
#ifdef LOSCFG_PLATFORM_STM32F429IGTX
Exti0Init();
LOS_HwiCreate(BUTTON_IRQ_NUM, 0, 0, ButtonIrqHandler, 0); // 16: cortex-m irq shift
LOS_HwiEnable(BUTTON_IRQ_NUM);
LOS_IntRestore(intSave);
#endif
return LOS_OK;
}
#ifdef __cplusplus
#if __cplusplus
}
#endif /* __cplusplus */
#endif /* __cplusplus */
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。