DMShellInstall
/
使用聚合磁盘单盘多分区部署两节点dsc日志（centos7）.txt

[BEGIN] 2022/12/28 14:38:16
[root@centos7 soft]# ./DMShellInstall -h

 ███████   ████     ████  ████████ ██               ██  ██ ██                    ██              ██  ██
░██░░░░██ ░██░██   ██░██ ██░░░░░░ ░██              ░██ ░██░██                   ░██             ░██ ░██
░██    ░██░██░░██ ██ ░██░██       ░██       █████  ░██ ░██░██ ███████   ██████ ██████  ██████   ░██ ░██
░██    ░██░██ ░░███  ░██░█████████░██████  ██░░░██ ░██ ░██░██░░██░░░██ ██░░░░ ░░░██░  ░░░░░░██  ░██ ░██
░██    ░██░██  ░░█   ░██░░░░░░░░██░██░░░██░███████ ░██ ░██░██ ░██  ░██░░█████   ░██    ███████  ░██ ░██
░██    ██ ░██   ░    ░██       ░██░██  ░██░██░░░░  ░██ ░██░██ ░██  ░██ ░░░░░██  ░██   ██░░░░██  ░██ ░██
░███████  ░██        ░██ ████████ ░██  ░██░░██████ ███ ███░██ ███  ░██ ██████   ░░██ ░░████████ ███ ███
░░░░░░░   ░░         ░░ ░░░░░░░░  ░░   ░░  ░░░░░░ ░░░ ░░░ ░░ ░░░   ░░ ░░░░░░     ░░   ░░░░░░░░ ░░░ ░░░

用途: 一键部署达梦数据库[单机/数据守护/DMDSC集群]

用法: DMShellInstall [选项] 选项值 { COMMAND | help }

单机(Single):

-hn                  --hostname                     主机名
-dp                  --dm_passwd                    系统用户dmdba密码 [Dameng@123]
-d                   --env_dm_home                  数据库软件安装目录 [/dm]
-dd                  --data_dir                     数据库文件目录 [/dmdata]
-ad                  --arch_dir                     数据库归档目录 [/dmarch]
-bd                  --backup_dir                   数据库备份目录 [/dmbak]
-dn                  --db_name                      数据库名称 [DAMENG]
-in                  --instance_name                数据库实例名称 [DMSERVER]
-es                  --extent_size                  数据文件簇大小 [32]
-ps                  --page_size                    数据页大小 [32]
-cs                  --case_sensitive               字符串大小写敏感 [Y]
-c                   --charset                      数据库字符集 [1]
-lic                 --length_in_char               VARCHAR类型长度是否以字符为单位 [N]
-ls                  --log_size                     日志文件大小，单位M [1024]
-er                  --enable_arch                  是否开启归档模式 [Y]
-sl                  --space_limit                  归档空间大小，单位M [102400]
-pn                  --port_num                     监听端口号 [5236]
-sp                  --sysdba_pwd                   数据库SYSDBA用户密码 [SYSDBA]
-bm                  --backup_mode                  数据库备份模式 [2]
-ti                  --timeserver_ip                时间服务器IP地址
-m                   --only_conf_os                 仅配置操作系统，不安装达梦软件以及数据库 [N]
-ud                  --install_until_db             仅安装达梦数据库软件，不创建数据库 [N]
-oid                 --only_init_db                 仅初始化数据库 [N]
-opd                 --optimize_db                  建库后自动优化数据库 [N]
-oopd                --only_optimize_db             脚本仅优化数据库 [N]
-mp                  --mem_percent                  优化数据库时物理内存占比 [80]
-sm                  --sort_mode                    并发量较高的OLTP数据库参数 [0]，并发量不高的一般业务和OLAP类的数据库参数参数值 [1],默认[0]
-di                  --dm_iso_name                  达梦数据库安装镜像名称
-kp                  --key_path                     达梦数据库密钥路径

数据守护(DataWatch):

-rp                  --root_passwd                  root 用户密码
-dhn                 --wc_hostname                  主机名，以逗号隔开，例如 -dhn dw01,dw02
-dpi                 --wc_public_ip                 业务IP，以逗号隔开，例如 -dpi 10.211.55.101,10.211.55.102
-dmi                 --wc_mal_ip                    MAL IP，以逗号隔开，例如 -dmi 1.1.1.1,1.1.1.2
-dmoi                --dw_monitor_ip                监视器主机 IP
-dgn                 --dw_group_name                数据守护组名 [GRP1]
-mpn                 --mal_port_num                 MAL 监听端口号 [5336],取值范围：1024~65535
-mdpn                --mal_dw_port_num              守护进程端口号 [5436],取值范围：1024~65535
-midpn               --mal_inst_dw_port_num         实例监听守护进程端口号 [5536],取值范围：1024~65535
-oi                  --os_iso                       是否需要挂载操作系统 ISO 镜像，脚本自动配置 YUM 源 [Y]

DSC集群(DMDSC):

-rp                  --root_passwd                  root 用户密码
-dhn                 --wc_hostname                  主机名，以逗号隔开，例如 -dhn dsc01,dsc02
-dpi                 --wc_public_ip                 业务IP，以逗号隔开，例如 -dpi 10.211.55.101,10.211.55.102
-dmi                 --wc_mal_ip                    MAL IP，以逗号隔开，例如 -dmi 1.1.1.1,1.1.1.2
-ddn                 --dsc_db_name                  数据库DB_NAME，默认值：DSC
-den                 --dsc_ep_name                  数据库每个节点的实例名前缀，默认值：DSC
-dcd                 --dcr_disk                     dcr磁盘名字：/dev/sdb(多链路聚合的磁盘名字：dmdcr01)，只能传入一块磁盘
-vod                 --vote_disk                    vote磁盘名字：/dev/sdc(多链路聚合的磁盘名字：dmvote01)，只能传入一块磁盘
-lod                 --log_disk                     redo日志磁盘名字：/dev/sdd,/dev/sde(多链路聚合的磁盘名字：dmlog01,dmlog02),可以是一块盘，也可以是多块盘，如果没有划分单独的redo磁盘，可以不写
-ard                 --arch_disk                    归档日志磁盘名字：/dev/sdf,/dev/sdg(多链路聚合的磁盘名字：dmarch01,dmarch02),可以是一块盘，也可以是多块盘，如果没有划分单独的arch磁盘，可以不写
-dad                 --data_disk                    数据盘名字：/dev/sdh,/dev/sdi(多链路聚合的磁盘名字：dmdata01,dmdata02),可以是一块盘，也可以是多块盘，盘数必须大于等于 1
-apd                 --asm_pwd                      asm实例密码,默认值：Welcome1
-cdp                 --css_dcr_ep_port              css通信端口,默认值：[9341],取值范围：1024~65534
-adp                 --asm_dcr_ep_port              asm通信端口,默认值：[9351],取值范围：1024~65534
-ddp                 --db_dcr_ep_port               db通信端口,默认值：[9741],取值范围：1024~65534
-amp                 --asvrmal_mal_port             mal系统通信端口,默认值：[7236],取值范围：1024~65534
-mtp                 --multipath                    是否需要配置multipath多链路聚合，脚本默认不配置 [N]
-oi                  --os_iso                       是否需要挂载操作系统 ISO 镜像，脚本自动配置 YUM 源 [Y]

注意：本脚本仅用于新服务器上实施部署数据使用，请严禁在已运行数据库的主机上执行，以免发生数据丢失或者损坏，造成不可挽回的损失！！！

[root@centos7 soft]# ls
dm8_20221121_x86_rh6_64.iso  DMShellInstall
[root@centos7 soft]# ./DMShellInstall -di dm8_20221121_x86_rh6_64.iso -d /dm/dmdbms \
> -dd /dm/dmdata -bd /dm/dmbak \
> -hn dsc -rp 123456 \
> -ddn DMDSC -den DMDSC \
> -dpi 192.168.2.37,192.168.2.38 -dmi 172.16.2.37,172.16.2.38 \
> -dcd asmdata1 -vod asmdata2 -ard asmdata3,asmdata4 -lod asmdata5,asmdata6 -dad asmdata7,asmdata8,asmdata9 \
> -adp 12345 -cdp 12346 -ddp 12347 -amp 9999 \
> -mtp Y -oi N

 ███████   ████     ████  ████████ ██               ██  ██ ██                    ██              ██  ██
░██░░░░██ ░██░██   ██░██ ██░░░░░░ ░██              ░██ ░██░██                   ░██             ░██ ░██
░██    ░██░██░░██ ██ ░██░██       ░██       █████  ░██ ░██░██ ███████   ██████ ██████  ██████   ░██ ░██
░██    ░██░██ ░░███  ░██░█████████░██████  ██░░░██ ░██ ░██░██░░██░░░██ ██░░░░ ░░░██░  ░░░░░░██  ░██ ░██
░██    ░██░██  ░░█   ░██░░░░░░░░██░██░░░██░███████ ░██ ░██░██ ░██  ░██░░█████   ░██    ███████  ░██ ░██
░██    ██ ░██   ░    ░██       ░██░██  ░██░██░░░░  ░██ ░██░██ ░██  ░██ ░░░░░██  ░██   ██░░░░██  ░██ ░██
░███████  ░██        ░██ ████████ ░██  ░██░░██████ ███ ███░██ ███  ░██ ██████   ░░██ ░░████████ ███ ███
░░░░░░░   ░░         ░░ ░░░░░░░░  ░░   ░░  ░░░░░░ ░░░ ░░░ ░░ ░░░   ░░ ░░░░░░     ░░   ░░░░░░░░ ░░░ ░░░


请选择达梦数据库部署类型：单机[si]/数据守护[dw]/dsc集群[dsc]
dsc

达梦数据库安装部署类型: dsc


校验 192.168.2.37,192.168.2.38 地址，请等待！！！

校验 172.16.2.37,172.16.2.38 地址，请等待！！！

校验 asmdata1 磁盘，请等待！！！

校验 asmdata2 磁盘，请等待！！！

校验 asmdata5,asmdata6 磁盘，请等待！！！

校验 asmdata3,asmdata4 磁盘，请等待！！！

校验 asmdata7,asmdata8,asmdata9 磁盘，请等待！！！

主库安装 expect 软件用于 root 用户互信：

已加载插件：fastestmirror
Loading mirror speeds from cached hostfile
正在解决依赖关系
--> 正在检查事务
---> 软件包 expect.x86_64.0.5.45-14.el7_1 将被 安装
--> 正在处理依赖关系 libtcl8.5.so()(64bit)，它被软件包 expect-5.45-14.el7_1.x86_64 需要
--> 正在检查事务
---> 软件包 tcl.x86_64.1.8.5.13-8.el7 将被 安装
--> 解决依赖关系完成

依赖关系解决

===============================================================================================================================================================================================================
 Package                                         架构                                            版本                                                    源                                               大小
===============================================================================================================================================================================================================
正在安装:
 expect                                          x86_64                                          5.45-14.el7_1                                           OS-YUM                                          262 k
为依赖而安装:
 tcl                                             x86_64                                          1:8.5.13-8.el7                                          OS-YUM                                          1.9 M

事务概要
===============================================================================================================================================================================================================
安装  1 软件包 (+1 依赖软件包)

总下载量：2.1 M
安装大小：4.9 M
Downloading packages:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
总计                                                                                                                                                                            24 MB/s | 2.1 MB  00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  正在安装    : 1:tcl-8.5.13-8.el7.x86_64                                                                                                                                                                  1/2
  正在安装    : expect-5.45-14.el7_1.x86_64                                                                                                                                                                2/2
  验证中      : 1:tcl-8.5.13-8.el7.x86_64                                                                                                                                                                  1/2
  验证中      : expect-5.45-14.el7_1.x86_64                                                                                                                                                                2/2

已安装:
  expect.x86_64 0:5.45-14.el7_1

作为依赖被安装:
  tcl.x86_64 1:8.5.13-8.el7

完毕！

所有节点 root 用户配置互信：

# 192.168.2.37:22 SSH-2.0-OpenSSH_7.4
# 192.168.2.37:22 SSH-2.0-OpenSSH_7.4
# 192.168.2.37:22 SSH-2.0-OpenSSH_7.4
# 192.168.2.38:22 SSH-2.0-OpenSSH_7.4
# 192.168.2.38:22 SSH-2.0-OpenSSH_7.4
# 192.168.2.38:22 SSH-2.0-OpenSSH_7.4
spawn scp -rq /root/.ssh root@192.168.2.37:~
send: spawn id exp6 not open
    while executing
"send "123456\r""
spawn ssh-copy-id -i root@192.168.2.37
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed

/usr/bin/ssh-copy-id: WARNING: All keys were skipped because they already exist on the remote system.
		(if you think this is a mistake, you may want to use -f option)

send: spawn id exp6 not open
    while executing
"send "123456\r""
spawn scp -rq /root/.ssh root@192.168.2.38:~
root@192.168.2.38's password:
spawn ssh-copy-id -i root@192.168.2.38
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed

/usr/bin/ssh-copy-id: WARNING: All keys were skipped because they already exist on the remote system.
		(if you think this is a mistake, you may want to use -f option)

send: spawn id exp6 not open
    while executing
"send "123456\r""

拷贝脚本以及安装包到节点：192.168.2.38

dwnode.sh                                                                                                                                                                    100%  560   654.3KB/s   00:00
DMShellInstall                                                                                                                                                               100%  139KB  25.8MB/s   00:00
dm8_20221121_x86_rh6_64.iso                                                                                                                                                  100%  959MB  82.1MB/s   00:11

达梦数据库开始安装：

#==============================================================#
打印系统信息
#==============================================================#

服务器时间:

2022年 12月 28日 星期三 21:42:35 CST

操作系统版本:

NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"


cpu信息:

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                1
On-line CPU(s) list:   0
Thread(s) per core:    1
Core(s) per socket:    1
座：                 1
NUMA 节点：         1
厂商 ID：           GenuineIntel
CPU 系列：          6
型号：              142
型号名称：        Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz
步进：              12
CPU MHz：             1992.002
BogoMIPS：            3984.00
超管理器厂商：  VMware
虚拟化类型：     完全
L1d 缓存：          32K
L1i 缓存：          32K
L2 缓存：           256K
L3 缓存：           8192K
NUMA 节点0 CPU：    0
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon nopl xtopology tsc_reliable nonstop_tsc eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced fsgsbase tsc_adjust bmi1 avx2 smep bmi2 invpcid rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 arat md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities

内存信息:

              total        used        free      shared  buff/cache   available
Mem:           2827         241        1389           9        1196        2418
Swap:             0           0           0
              total        used        free      shared  buff/cache   available
Mem:           2.8G        241M        1.4G        9.5M        1.2G        2.4G
Swap:            0B          0B          0B

挂载信息:

/dev/mapper/centos-root /                       xfs     defaults        0 0
UUID=dc24af02-0269-4d90-88b9-c6fdb8c27470 /boot                   xfs     defaults        0 0
/dev/sr0                /mnt/cdrom              iso9660 defaults        0 0

目录信息:

文件系统                 容量  已用  可用 已用% 挂载点
devtmpfs                 1.4G     0  1.4G    0% /dev
tmpfs                    1.4G     0  1.4G    0% /dev/shm
tmpfs                    1.4G  9.5M  1.4G    1% /run
tmpfs                    1.4G     0  1.4G    0% /sys/fs/cgroup
/dev/mapper/centos-root   91G  2.7G   89G    3% /
/dev/sr0                 4.4G  4.4G     0  100% /mnt/cdrom
/dev/sda1               1014M  151M  864M   15% /boot
tmpfs                    283M     0  283M    0% /run/user/0
/dev/loop0               960M  960M     0  100% /dmiso

#==============================================================#
关闭 SWAP 功能
#==============================================================#

              total        used        free      shared  buff/cache   available
Mem:        2895196      247248     1423008        9696     1224940     2476912
Swap:             0           0           0

##/dev/mapper/centos-swap swap                    swap    defaults        0 0

#==============================================================#
禁用防火墙
#==============================================================#

● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:firewalld(1)

12月 28 21:18:06 centos7 systemd[1]: Starting firewalld - dynamic firewall daemon...
12月 28 21:18:06 centos7 systemd[1]: Started firewalld - dynamic firewall daemon.
12月 28 21:18:07 centos7 firewalld[726]: WARNING: AllowZoneDrifting is enabled. This is considered an insecure configuration option. It will be removed in a future release. Please consider disabling it now.
12月 28 21:35:10 centos7 systemd[1]: Stopping firewalld - dynamic firewall daemon...
12月 28 21:35:10 centos7 systemd[1]: Stopped firewalld - dynamic firewall daemon.

#==============================================================#
禁用 selinux
#==============================================================#

SELINUX=disabled
SELINUXTYPE=targeted

#==============================================================#
配置主机名
#==============================================================#

   Static hostname: dsc01
         Icon name: computer-vm
           Chassis: vm
        Machine ID: f4a41440d98d417dbb5516d46b966467
           Boot ID: a97baae239384e028b43566ad3ca22a7
    Virtualization: vmware
  Operating System: CentOS Linux 7 (Core)
       CPE OS Name: cpe:/o:centos:centos:7
            Kernel: Linux 3.10.0-1160.el7.x86_64
      Architecture: x86-64

#==============================================================#
配置时间同步
#==============================================================#

● chronyd.service - NTP client/server
   Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:chronyd(8)
           man:chrony.conf(5)

12月 28 21:18:06 centos7 systemd[1]: Starting NTP client/server...
12月 28 21:18:06 centos7 chronyd[723]: chronyd version 3.4 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP +SCFILTER +SIGND +ASYNCDNS +SECHASH +IPV6 +DEBUG)
12月 28 21:18:06 centos7 chronyd[723]: Frequency 0.000 +/- 1000000.000 ppm read from /var/lib/chrony/drift
12月 28 21:18:06 centos7 systemd[1]: Started NTP client/server.
12月 28 21:35:10 centos7 systemd[1]: Stopping NTP client/server...
12月 28 21:35:10 centos7 systemd[1]: Stopped NTP client/server.
2022年 12月 28日 星期三 21:42:35 CST

* 6 * * * /root/drop_cache.sh

#==============================================================#
禁用透明大页 & 禁用NUMA & 开启 I/0 schedule
#==============================================================#

index=0
kernel=/boot/vmlinuz-3.10.0-1160.el7.x86_64
args="ro crashkernel=auto spectre_v2=retpoline rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=zh_CN.UTF-8 numa=off transparent_hugepage=never elevator=deadline"
--
index=1
kernel=/boot/vmlinuz-0-rescue-f4a41440d98d417dbb5516d46b966467
args="ro crashkernel=auto spectre_v2=retpoline rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet numa=off transparent_hugepage=never elevator=deadline"

#==============================================================#
创建 DMDBA 用户以及安装目录
#==============================================================#

更改用户 dmdba 的密码 。
passwd：所有的身份验证令牌已经成功更新。

dmdba:x:54321:54321::/home/dmdba:/bin/bash

uid=54321(dmdba) gid=54321(dinstall) 组=54321(dinstall),54322(dmdba)

#==============================================================#
配置系统参数
#==============================================================#

fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
vm.swappiness = 0
vm.dirty_background_ratio = 3
vm.dirty_ratio = 80
vm.dirty_expire_centisecs = 500
vm.dirty_writeback_centisecs = 100
sysctl: cannot stat /proc/sys/vm/numa_stat: 没有那个文件或目录
vm.overcommit_memory = 0

#==============================================================#
配置用户限制
#==============================================================#

dmdba - nice   0
dmdba - as     unlimited
dmdba - fsize  unlimited
dmdba - nproc  131072
dmdba - nofile 131072
dmdba - core   unlimited
dmdba - data   unlimited
root  - nice   0
root  - as     unlimited
root  - fsize  unlimited
root  - nproc  131072
root  - nofile 131072
root  - core   unlimited
root  - data   unlimited

[Manager]
DefaultLimitCORE=infinity
DefaultLimitNOFILE=65536
DefaultLimitNPROC=10240

auth [user_unknown=ignore success=ok ignore=ignore default=bad] pam_securetty.so
auth       substack     system-auth
auth       include      postlogin
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
session    required     pam_selinux.so close
session    required     pam_loginuid.so
session    optional     pam_console.so
session    required     pam_selinux.so open
session    required     pam_namespace.so
session    optional     pam_keyinit.so force revoke
session    include      system-auth
session    include      postlogin
-session   optional     pam_ck_connector.so
session required pam_limits.so
session required /lib64/security/pam_limits.so

#==============================================================#
禁用 RemoveIPC
#==============================================================#

[Login]
RemoveIPC=no

#==============================================================#
配置语言中文
#==============================================================#


#==============================================================#
配置cache脚本
#==============================================================#

sync
echo 1 > /proc/sys/vm/drop_caches
sync
echo 1 > /proc/sys/vm/drop_caches
* 6 * * * /root/drop_cache.sh
* 6 * * * /root/drop_cache.sh

#==============================================================#
配置用户环境变量
#==============================================================#

if [ -f ~/.bashrc ]; then
	. ~/.bashrc
fi
PATH=$PATH:$HOME/.local/bin:$HOME/bin
export PATH
export MALLOC_ARENA_MAX=1
export DM_HOME=/dm/dmdbms
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$DM_HOME/bin
export PATH=$PATH:$DM_HOME/bin:$DM_HOME/tool
export PS1="[`whoami`@`hostname`:"'\w]$ '
alias ds="disql -L SYSDBA/'\"SYSDBA\"':5236 "
alias dsql="disql -L -S SYSDBA/'\"SYSDBA\"':5236 \\\`"
alias dssql="disql -L -S SYSDBA/'\"SYSDBA\"':5236 \\\`"
alias dmlog='cd $DM_HOME/log'

#==============================================================#
挂载达梦安装镜像
#==============================================================#

总用量 959M
-r-xr-xr-x. 1 root root 2.7M 11月 21 16:25 DM8 Install.pdf
-r-xr-xr-x. 1 root root 957M 11月 21 16:27 DMInstall.bin

#==============================================================#
安装达梦数据库软件
#==============================================================#

解压安装程序.........
2022-12-28 21:42:54
[INFO] 安装达梦数据库...
2022-12-28 21:42:54
[INFO] 安装 基础 模块...
2022-12-28 21:42:58
[INFO] 安装 服务器 模块...
2022-12-28 21:42:59
[INFO] 安装 客户端 模块...
2022-12-28 21:43:02
[INFO] 安装 驱动 模块...
2022-12-28 21:43:04
[INFO] 安装 手册 模块...
2022-12-28 21:43:05
[INFO] 安装 服务 模块...
2022-12-28 21:43:06
[INFO] 移动日志文件。
2022-12-28 21:43:07
[INFO] 更改安装目录权限完成。
2022-12-28 21:43:07
[INFO] 正在启动DmAPService服务...
2022-12-28 21:43:07
[INFO] 启动DmAPService服务成功。
2022-12-28 21:43:07
[INFO] 安装达梦数据库完成。

#==============================================================#
创建UDEV规则文件
#==============================================================#

KERNEL=="dm-*", ENV{DM_UUID}=="part1-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdcr01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part2-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmvote01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part5-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmlog01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part6-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmlog02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part3-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmarch01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part4-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmarch02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part7-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part8-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part9-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata03", OWNER="dmdba", GROUP="dinstall", MODE="0660"

#==============================================================#
查看udev磁盘
#==============================================================#

ls -lh /dev/asmdisk
总用量 0
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmarch01 -> ../dm-5
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmarch02 -> ../dm-6
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmdata01 -> ../dm-9
lrwxrwxrwx. 1 root root 8 12月 28 21:43 dmdata02 -> ../dm-10
lrwxrwxrwx. 1 root root 8 12月 28 21:43 dmdata03 -> ../dm-11
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmdcr01 -> ../dm-3
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmlog01 -> ../dm-7
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmlog02 -> ../dm-8
lrwxrwxrwx. 1 root root 7 12月 28 21:43 dmvote01 -> ../dm-4

#==============================================================#
创建dsc参数文件
#==============================================================#

ls -lh /dm/dmdata/DMDSC/
总用量 16K
-rw-r--r--. 1 dmdba dinstall  258 12月 28 21:43 dmasvrmal.ini
-rw-r--r--. 1 dmdba dinstall  165 12月 28 21:43 dmcssm.ini
-rw-r--r--. 1 dmdba dinstall 1.1K 12月 28 21:43 dmdcr_cfg.ini
-rw-r--r--. 1 dmdba dinstall  423 12月 28 21:43 dmdcr.ini

#==============================================================#
注册css和asm服务
#==============================================================#

Created symlink from /etc/systemd/system/multi-user.target.wants/DmCSSServiceCss.service to /usr/lib/systemd/system/DmCSSServiceCss.service.
创建服务(DmCSSServiceCss)完成
Created symlink from /etc/systemd/system/multi-user.target.wants/DmASMSvrServiceAsmsvr.service to /usr/lib/systemd/system/DmASMSvrServiceAsmsvr.service.
创建服务(DmASMSvrServiceAsmsvr)完成

#==============================================================#
创建归档和备份脚本
#==============================================================#

创建数据库归档脚本：

-rw-r--r--. 1 dmdba dinstall 338 12月 28 21:43 /home/dmdba/scripts/conf_arch.sql

创建数据库备份脚本：

-rw-r--r--. 1 dmdba dinstall 784 12月 28 21:43 /home/dmdba/scripts/conf_fullbackup.sql
-rw-r--r--. 1 dmdba dinstall 1.6K 12月 28 21:43 /home/dmdba/scripts/conf_incrbackup.sql

创建 DMDBA 用户脚本，密码 SYSDBA ：

-rw-r--r--. 1 dmdba dinstall 696 12月 28 21:43 /home/dmdba/scripts/ct_dbuser.sql

#==============================================================#
创建达梦数据库优化脚本
#==============================================================#

创建数据库参数配置脚本：

-rw-r--r--. 1 dmdba dinstall 17K 12月 28 21:43 /home/dmdba/scripts/conf_para.sql

创建数据库优化结果查询脚本：

-rw-r--r--. 1 dmdba dinstall 2.2K 12月 28 21:43 /home/dmdba/scripts/query_dm.sql

#==============================================================#
配置节点：192.168.2.38
#==============================================================#


节点 192.168.2.38 开始执行配置：


 ███████   ████     ████  ████████ ██               ██  ██ ██                    ██              ██  ██
░██░░░░██ ░██░██   ██░██ ██░░░░░░ ░██              ░██ ░██░██                   ░██             ░██ ░██
░██    ░██░██░░██ ██ ░██░██       ░██       █████  ░██ ░██░██ ███████   ██████ ██████  ██████   ░██ ░██
░██    ░██░██ ░░███  ░██░█████████░██████  ██░░░██ ░██ ░██░██░░██░░░██ ██░░░░ ░░░██░  ░░░░░░██  ░██ ░██
░██    ░██░██  ░░█   ░██░░░░░░░░██░██░░░██░███████ ░██ ░██░██ ░██  ░██░░█████   ░██    ███████  ░██ ░██
░██    ██ ░██   ░    ░██       ░██░██  ░██░██░░░░  ░██ ░██░██ ░██  ░██ ░░░░░██  ░██   ██░░░░██  ░██ ░██
░███████  ░██        ░██ ████████ ░██  ░██░░██████ ███ ███░██ ███  ░██ ██████   ░░██ ░░████████ ███ ███
░░░░░░░   ░░         ░░ ░░░░░░░░  ░░   ░░  ░░░░░░ ░░░ ░░░ ░░ ░░░   ░░ ░░░░░░     ░░   ░░░░░░░░ ░░░ ░░░

达梦数据库开始安装：

#==============================================================#
打印系统信息
#==============================================================#

服务器时间:

2022年 12月 28日 星期三 21:40:42 CST

操作系统版本:

NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"


cpu信息:

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                1
On-line CPU(s) list:   0
Thread(s) per core:    1
Core(s) per socket:    1
座：                 1
NUMA 节点：         1
厂商 ID：           GenuineIntel
CPU 系列：          6
型号：              142
型号名称：        Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz
步进：              12
CPU MHz：             1992.002
BogoMIPS：            3984.00
超管理器厂商：  VMware
虚拟化类型：     完全
L1d 缓存：          32K
L1i 缓存：          32K
L2 缓存：           256K
L3 缓存：           8192K
NUMA 节点0 CPU：    0
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon nopl xtopology tsc_reliable nonstop_tsc eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced fsgsbase tsc_adjust bmi1 avx2 smep bmi2 invpcid rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 arat md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities

内存信息:

              total        used        free      shared  buff/cache   available
Mem:           2827         270        1392           9        1163        2380
Swap:          8191           0        8191
              total        used        free      shared  buff/cache   available
Mem:           2.8G        270M        1.4G        9.5M        1.1G        2.3G
Swap:          8.0G          0B        8.0G

挂载信息:

/dev/mapper/centos-root /                       xfs     defaults        0 0
UUID=dc24af02-0269-4d90-88b9-c6fdb8c27470 /boot                   xfs     defaults        0 0
/dev/mapper/centos-swap swap                    swap    defaults        0 0
/dev/sr0                /mnt/cdrom              iso9660 defaults        0 0

目录信息:

文件系统                 容量  已用  可用 已用% 挂载点
devtmpfs                 1.4G     0  1.4G    0% /dev
tmpfs                    1.4G     0  1.4G    0% /dev/shm
tmpfs                    1.4G  9.6M  1.4G    1% /run
tmpfs                    1.4G     0  1.4G    0% /sys/fs/cgroup
/dev/mapper/centos-root   91G  2.7G   89G    3% /
/dev/sr0                 4.4G  4.4G     0  100% /mnt/cdrom
/dev/sda1               1014M  151M  864M   15% /boot
tmpfs                    283M     0  283M    0% /run/user/0

#==============================================================#
关闭 SWAP 功能
#==============================================================#

              total        used        free      shared  buff/cache   available
Mem:        2895196      270584     1435164        9740     1189448     2444608
Swap:             0           0           0

#/dev/mapper/centos-swap swap                    swap    defaults        0 0

#==============================================================#
禁用防火墙
#==============================================================#

● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:firewalld(1)

12月 28 21:15:36 centos7 systemd[1]: Starting firewalld - dynamic firewall daemon...
12月 28 21:15:36 centos7 systemd[1]: Started firewalld - dynamic firewall daemon.
12月 28 21:15:37 centos7 firewalld[732]: WARNING: AllowZoneDrifting is enabled. This is considered an insecure configuration option. It will be removed in a future release. Please consider disabling it now.
12月 28 21:40:42 centos7 systemd[1]: Stopping firewalld - dynamic firewall daemon...
12月 28 21:40:42 centos7 systemd[1]: Stopped firewalld - dynamic firewall daemon.

#==============================================================#
禁用 selinux
#==============================================================#

SELINUX=disabled
SELINUXTYPE=targeted

#==============================================================#
配置主机名
#==============================================================#

   Static hostname: dsc02
         Icon name: computer-vm
           Chassis: vm
        Machine ID: f4a41440d98d417dbb5516d46b966467
           Boot ID: 4445142e789347a99457a39ccbf82cae
    Virtualization: vmware
  Operating System: CentOS Linux 7 (Core)
       CPE OS Name: cpe:/o:centos:centos:7
            Kernel: Linux 3.10.0-1160.el7.x86_64
      Architecture: x86-64

#==============================================================#
配置时间同步
#==============================================================#

● chronyd.service - NTP client/server
   Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:chronyd(8)
           man:chrony.conf(5)

12月 28 21:15:36 centos7 systemd[1]: Starting NTP client/server...
12月 28 21:15:36 centos7 chronyd[714]: chronyd version 3.4 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP +SCFILTER +SIGND +ASYNCDNS +SECHASH +IPV6 +DEBUG)
12月 28 21:15:36 centos7 chronyd[714]: Frequency 0.000 +/- 1000000.000 ppm read from /var/lib/chrony/drift
12月 28 21:15:36 centos7 systemd[1]: Started NTP client/server.
12月 28 21:40:42 dsc02 systemd[1]: Stopping NTP client/server...
12月 28 21:40:42 dsc02 systemd[1]: Stopped NTP client/server.
2022年 12月 28日 星期三 21:40:42 CST

no crontab for root

#==============================================================#
禁用透明大页 & 禁用NUMA & 开启 I/0 schedule
#==============================================================#

index=0
kernel=/boot/vmlinuz-3.10.0-1160.el7.x86_64
args="ro crashkernel=auto spectre_v2=retpoline rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=zh_CN.UTF-8 numa=off transparent_hugepage=never elevator=deadline"
--
index=1
kernel=/boot/vmlinuz-0-rescue-f4a41440d98d417dbb5516d46b966467
args="ro crashkernel=auto spectre_v2=retpoline rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet numa=off transparent_hugepage=never elevator=deadline"

#==============================================================#
创建 DMDBA 用户以及安装目录
#==============================================================#

更改用户 dmdba 的密码 。
passwd：所有的身份验证令牌已经成功更新。

dmdba:x:54321:54321::/home/dmdba:/bin/bash

uid=54321(dmdba) gid=54321(dinstall) 组=54321(dinstall),54322(dmdba)

#==============================================================#
配置系统参数
#==============================================================#

fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
vm.swappiness = 0
vm.dirty_background_ratio = 3
vm.dirty_ratio = 80
vm.dirty_expire_centisecs = 500
vm.dirty_writeback_centisecs = 100
sysctl: cannot stat /proc/sys/vm/numa_stat: 没有那个文件或目录
vm.overcommit_memory = 0

#==============================================================#
配置用户限制
#==============================================================#

dmdba - nice   0
dmdba - as     unlimited
dmdba - fsize  unlimited
dmdba - nproc  131072
dmdba - nofile 131072
dmdba - core   unlimited
dmdba - data   unlimited
root  - nice   0
root  - as     unlimited
root  - fsize  unlimited
root  - nproc  131072
root  - nofile 131072
root  - core   unlimited
root  - data   unlimited

[Manager]
DefaultLimitCORE=infinity
DefaultLimitNOFILE=65536
DefaultLimitNPROC=10240

auth [user_unknown=ignore success=ok ignore=ignore default=bad] pam_securetty.so
auth       substack     system-auth
auth       include      postlogin
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
session    required     pam_selinux.so close
session    required     pam_loginuid.so
session    optional     pam_console.so
session    required     pam_selinux.so open
session    required     pam_namespace.so
session    optional     pam_keyinit.so force revoke
session    include      system-auth
session    include      postlogin
-session   optional     pam_ck_connector.so
session required pam_limits.so
session required /lib64/security/pam_limits.so

#==============================================================#
禁用 RemoveIPC
#==============================================================#

[Login]
RemoveIPC=no

#==============================================================#
配置语言中文
#==============================================================#

export LANG=zh_CN.UTF-8

#==============================================================#
配置cache脚本
#==============================================================#

sync
echo 1 > /proc/sys/vm/drop_caches
* 6 * * * /root/drop_cache.sh

#==============================================================#
配置用户环境变量
#==============================================================#

if [ -f ~/.bashrc ]; then
	. ~/.bashrc
fi
PATH=$PATH:$HOME/.local/bin:$HOME/bin
export PATH
export MALLOC_ARENA_MAX=1
export DM_HOME=/dm/dmdbms
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$DM_HOME/bin
export PATH=$PATH:$DM_HOME/bin:$DM_HOME/tool
export PS1="[`whoami`@`hostname`:"'\w]$ '
alias ds="disql -L SYSDBA/'\"SYSDBA\"':5236 "
alias dsql="disql -L -S SYSDBA/'\"SYSDBA\"':5236 \\\`"
alias dssql="disql -L -S SYSDBA/'\"SYSDBA\"':5236 \\\`"
alias dmlog='cd $DM_HOME/log'

#==============================================================#
挂载达梦安装镜像
#==============================================================#

总用量 959M
-r-xr-xr-x. 1 root root 2.7M 11月 21 16:25 DM8 Install.pdf
-r-xr-xr-x. 1 root root 957M 11月 21 16:27 DMInstall.bin

#==============================================================#
安装达梦数据库软件
#==============================================================#

解压安装程序.........
2022-12-28 21:41:11
[INFO] 安装达梦数据库...
2022-12-28 21:41:11
[INFO] 安装 基础 模块...
2022-12-28 21:41:16
[INFO] 安装 服务器 模块...
2022-12-28 21:41:17
[INFO] 安装 客户端 模块...
2022-12-28 21:41:21
[INFO] 安装 驱动 模块...
2022-12-28 21:41:23
[INFO] 安装 手册 模块...
2022-12-28 21:41:23
[INFO] 安装 服务 模块...
2022-12-28 21:41:25
[INFO] 移动日志文件。
2022-12-28 21:41:25
[INFO] 更改安装目录权限完成。
2022-12-28 21:41:26
[INFO] 正在启动DmAPService服务...
2022-12-28 21:41:26
[INFO] 启动DmAPService服务成功。
2022-12-28 21:41:26
[INFO] 安装达梦数据库完成。

#==============================================================#
拷贝UDEV规则文件
#==============================================================#

KERNEL=="dm-*", ENV{DM_UUID}=="part1-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdcr01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part2-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmvote01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part5-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmlog01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part6-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmlog02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part3-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmarch01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part4-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmarch02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part7-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata01", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part8-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata02", OWNER="dmdba", GROUP="dinstall", MODE="0660"
KERNEL=="dm-*", ENV{DM_UUID}=="part9-mpath-36001405265c20d06e59400ebd6cc57d5", SYMLINK+="asmdisk/dmdata03", OWNER="dmdba", GROUP="dinstall", MODE="0660"

#==============================================================#
查看udev磁盘
#==============================================================#

ls -lh /dev/asmdisk
总用量 0
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmarch01 -> ../dm-5
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmarch02 -> ../dm-6
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmdata01 -> ../dm-9
lrwxrwxrwx. 1 root root 8 12月 28 21:41 dmdata02 -> ../dm-10
lrwxrwxrwx. 1 root root 8 12月 28 21:41 dmdata03 -> ../dm-11
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmdcr01 -> ../dm-3
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmlog01 -> ../dm-7
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmlog02 -> ../dm-8
lrwxrwxrwx. 1 root root 7 12月 28 21:41 dmvote01 -> ../dm-4

#==============================================================#
拷贝dsc参数文件
#==============================================================#

ls -lh /dm/dmdata/DMDSC/
总用量 16K
-rw-r--r--. 1 dmdba dinstall  258 12月 28 21:41 dmasvrmal.ini
-rw-r--r--. 1 dmdba dinstall  165 12月 28 21:41 dmcssm.ini
-rw-r--r--. 1 dmdba dinstall 1.1K 12月 28 21:41 dmdcr_cfg.ini
-rw-r--r--. 1 dmdba dinstall  423 12月 28 21:41 dmdcr.ini

#==============================================================#
注册css和asm服务
#==============================================================#

Created symlink from /etc/systemd/system/multi-user.target.wants/DmCSSServiceCss.service to /usr/lib/systemd/system/DmCSSServiceCss.service.
创建服务(DmCSSServiceCss)完成
Created symlink from /etc/systemd/system/multi-user.target.wants/DmASMSvrServiceAsmsvr.service to /usr/lib/systemd/system/DmASMSvrServiceAsmsvr.service.
创建服务(DmASMSvrServiceAsmsvr)完成

#==============================================================#
创建归档和备份脚本
#==============================================================#

创建数据库归档脚本：

-rw-r--r--. 1 dmdba dinstall 338 12月 28 21:41 /home/dmdba/scripts/conf_arch.sql

创建数据库备份脚本：

-rw-r--r--. 1 dmdba dinstall 784 12月 28 21:41 /home/dmdba/scripts/conf_fullbackup.sql
-rw-r--r--. 1 dmdba dinstall 1.6K 12月 28 21:41 /home/dmdba/scripts/conf_incrbackup.sql

创建 DMDBA 用户脚本，密码 SYSDBA ：

-rw-r--r--. 1 dmdba dinstall 696 12月 28 21:41 /home/dmdba/scripts/ct_dbuser.sql

#==============================================================#
创建达梦数据库优化脚本
#==============================================================#

创建数据库参数配置脚本：

-rw-r--r--. 1 dmdba dinstall 17K 12月 28 21:41 /home/dmdba/scripts/conf_para.sql

创建数据库优化结果查询脚本：

-rw-r--r--. 1 dmdba dinstall 2.2K 12月 28 21:41 /home/dmdba/scripts/query_dm.sql

Connection to 192.168.2.38 closed.

节点 192.168.2.38 配置完成！

#==============================================================#
初始化asm磁盘
#==============================================================#

DMASMCMD V8
ASM>create dcrdisk '/dev/asmdisk/dmdcr01' 'dmdcr01'

[Trace]The ASM initialize dcrdisk /dev/asmdisk/dmdcr01 to name DMASMdmdcr01
Used time: 10.569(ms).
ASM>create votedisk '/dev/asmdisk/dmvote01' 'dmvote01'

[Trace]The ASM initialize votedisk /dev/asmdisk/dmvote01 to name DMASMdmvote01
Used time: 4.553(ms).
ASM>create asmdisk '/dev/asmdisk/dmlog01' 'dmlog01'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmlog01 to name DMASMdmlog01
Used time: 8.710(ms).
ASM>create asmdisk '/dev/asmdisk/dmlog02' 'dmlog02'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmlog02 to name DMASMdmlog02
Used time: 17.997(ms).
ASM>create asmdisk '/dev/asmdisk/dmarch01' 'dmarch01'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmarch01 to name DMASMdmarch01
Used time: 13.059(ms).
ASM>create asmdisk '/dev/asmdisk/dmarch02' 'dmarch02'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmarch02 to name DMASMdmarch02
Used time: 11.728(ms).
ASM>create asmdisk '/dev/asmdisk/dmdata01' 'dmdata01'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmdata01 to name DMASMdmdata01
Used time: 12.316(ms).
ASM>create asmdisk '/dev/asmdisk/dmdata02' 'dmdata02'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmdata02 to name DMASMdmdata02
Used time: 13.669(ms).
ASM>create asmdisk '/dev/asmdisk/dmdata03' 'dmdata03'

[Trace]The ASM initialize asmdisk /dev/asmdisk/dmdata03 to name DMASMdmdata03
Used time: 11.307(ms).
ASM>init dcrdisk '/dev/asmdisk/dmdcr01' from '/dm/dmdata/DMDSC/dmdcr_cfg.ini'identified by 'Welcome1'

[Trace]DG 126 alloc one extent for inodes, addr(disk_id, disk_auno, extent_no):(0,0,1).
[Trace]DG 126 allocate 4 extents for file 0xfe000002.
[Trace]DG 126 alloc 4 extents for 0xfe000002, addr(disk_id, disk_auno, extent_no):(0, 0, 2)->(0, 0, 5), need_init = 1.
Used time: 342.123(ms).
ASM>init votedisk '/dev/asmdisk/dmvote01' from '/dm/dmdata/DMDSC/dmdcr_cfg.ini'

[Trace]DG 125 alloc one extent for inodes, addr(disk_id, disk_auno, extent_no):(0,0,1).
[Trace]DG 125 allocate 4 extents for file 0xfd000002.
[Trace]DG 125 alloc 4 extents for 0xfd000002, addr(disk_id, disk_auno, extent_no):(0, 0, 2)->(0, 0, 5), need_init = 1.
Used time: 183.202(ms).


#==============================================================#
启动css和asm服务
#==============================================================#

Starting DmCSSServiceCss:                                  [ OK ]

节点 192.168.2.37 启动成功

Starting DmCSSServiceCss:                                  [ OK ]

节点 192.168.2.38 启动成功

Starting DmASMSvrServiceAsmsvr:                            [ OK ]

节点 192.168.2.37 启动成功

Starting DmASMSvrServiceAsmsvr:                            [ OK ]

节点 192.168.2.38 启动成功


#==============================================================#
创建ASM磁盘组
#==============================================================#

DMASMTOOL V8
Used time: 275.527(ms).
ASM>ASM>DMASMTOOL V8
Used time: 113.666(ms).
ASM>ASM>DMASMTOOL V8
Used time: 184.261(ms).
ASM>ASM>DMASMTOOL V8
Used time: 94.176(ms).
ASM>ASM>DMASMTOOL V8
Used time: 206.977(ms).
ASM>ASM>DMASMTOOL V8
Used time: 102.668(ms).
ASM>ASM>DMASMTOOL V8
Used time: 110.920(ms).
ASM>ASM>

#==============================================================#
初始化达梦数据库
#==============================================================#

initdb V8
db version: 0x7000c
file dm.key not found, use default license!
License will expire on 2023-11-21
Normal of FAST
Normal of DEFAULT
Normal of RECYCLE
Normal of KEEP
Normal of ROLL

 log file path: +DMLOG/log/dmdsc0_log01.log


 log file path: +DMLOG/log/dmdsc0_log02.log


 log file path: +DMLOG/log/dmdsc1_log01.log


 log file path: +DMLOG/log/dmdsc1_log02.log

write to dir [+DMDATA/data/DMDSC].
create dm database success. 2022-12-28 21:46:18

数据库初始化完成

#==============================================================#
注册服务并启动数据库
#==============================================================#

Created symlink from /etc/systemd/system/multi-user.target.wants/DmServiceDMDSC.service to /usr/lib/systemd/system/DmServiceDMDSC.service.
创建服务(DmServiceDMDSC)完成

Starting DmServiceDMDSC: connnect dmasmtool successfully.
                                                           [ OK ]
节点 192.168.2.37 启动成功

Created symlink from /etc/systemd/system/multi-user.target.wants/DmServiceDMDSC.service to /usr/lib/systemd/system/DmServiceDMDSC.service.
创建服务(DmServiceDMDSC)完成

Starting DmServiceDMDSC: connnect dmasmtool successfully.
                                                           [ OK ]

节点 192.168.2.38 启动成功


#==============================================================#
创建数据库归档
#==============================================================#


在节点 192.168.2.37 创建归档

密钥过期时间：2023-11-21
操作已执行
已用时间: 2.551(毫秒). 执行号:0.
操作已执行
已用时间: 122.393(毫秒). 执行号:0.
操作已执行
已用时间: 111.464(毫秒). 执行号:0.
操作已执行
已用时间: 214.584(毫秒). 执行号:0.
操作已执行
已用时间: 8.627(毫秒). 执行号:0.

在节点 192.168.2.38 创建归档

密钥过期时间：2023-11-21
操作已执行
已用时间: 3.120(毫秒). 执行号:0.
操作已执行
已用时间: 98.810(毫秒). 执行号:0.
操作已执行
已用时间: 125.603(毫秒). 执行号:0.
操作已执行
已用时间: 220.297(毫秒). 执行号:0.
操作已执行
已用时间: 37.711(毫秒). 执行号:0.

#==============================================================#
在 192.168.2.38 创建备份
#==============================================================#

密钥过期时间：2023-11-21

NAME     DESCRIBE
-------- -------------------------------------------------------------------------------
bak_full 周六全量备份，并删除30天之前的备份。
bak_inc  周日到周五做增量备份,如果失败,清除8天前备份,做全量备份

NAME      COMMAND
--------- -----------------------------------------------------------------------------------------------------------
bak_clear CALL SF_BAKSET_BACKUP_DIR_ADD('DISK','/dm/dmbak/DMDSC'); CALL SP_DB_BAKSET_REMOVE_BATCH('DISK',SYSDATE-30);

#==============================================================#
优化数据库基础参数
#==============================================================#

密钥过期时间：2023-11-21
SP_SET_PARA_VALUE(2,'WORKER_THREADS',      1);
SP_SET_PARA_VALUE(2,'TASK_THREADS',        4);
SP_SET_PARA_VALUE(2,'IO_THR_GROUPS',       2);
SP_SET_PARA_VALUE(2,'MAX_OS_MEMORY',       80);
SP_SET_PARA_VALUE(2,'MEMORY_POOL',         100);
SP_SET_PARA_VALUE(2,'MEMORY_N_POOLS',      2);
SP_SET_PARA_VALUE(2,'MEMORY_TARGET',       0);
SP_SET_PARA_VALUE(2,'BUFFER',              1000);
SP_SET_PARA_VALUE(2,'MAX_BUFFER',          1000);
SP_SET_PARA_VALUE(2,'BUFFER_POOLS',        3);
SP_SET_PARA_VALUE(2,'RECYCLE',        	    80);
SP_SET_PARA_VALUE(2,'RECYCLE_POOLS',       2);
SP_SET_PARA_VALUE(2,'FAST_POOL_PAGES',     3000);
SP_SET_PARA_VALUE(2,'FAST_ROLL_PAGES',     1000);
SP_SET_PARA_VALUE(2,'MEMORY_MAGIC_CHECK',   1);
SP_SET_PARA_VALUE(1,'HJ_BUF_GLOBAL_SIZE',  500);
SP_SET_PARA_VALUE(1,'HJ_BUF_SIZE',         50);
SP_SET_PARA_VALUE(1,'HAGR_BUF_GLOBAL_SIZE',500);
SP_SET_PARA_VALUE(1,'HAGR_BUF_SIZE',       50);
SP_SET_PARA_VALUE(2,'SORT_FLAG',           0);
SP_SET_PARA_VALUE(2,'SORT_BLK_SIZE',       1);
SP_SET_PARA_VALUE(2,'SORT_BUF_SIZE',       2);
SP_SET_PARA_VALUE(2,'SORT_BUF_GLOBAL_SIZE',500);
SP_SET_PARA_VALUE(2,'RLOG_POOL_SIZE',      256);
SP_SET_PARA_VALUE(2,'CACHE_POOL_SIZE',     200);
SP_SET_PARA_VALUE(2,'DICT_BUF_SIZE',       50);
SP_SET_PARA_VALUE(2,'VM_POOL_TARGET',       16384);
SP_SET_PARA_VALUE(2,'SESS_POOL_TARGET',     16384);
SP_SET_PARA_VALUE(2,'USE_PLN_POOL',        1);
SP_SET_PARA_VALUE(2,'ENABLE_MONITOR',      1);
SP_SET_PARA_VALUE(2,'SVR_LOG',             0);
SP_SET_PARA_VALUE(2,'TEMP_SIZE',           1024);
SP_SET_PARA_VALUE(2,'TEMP_SPACE_LIMIT',    102400);
SP_SET_PARA_VALUE(2,'MAX_SESSIONS',        1500);
SP_SET_PARA_VALUE(2,'MAX_SESSION_STATEMENT', 20000);
SP_SET_PARA_VALUE(2,'PK_WITH_CLUSTER',		  0);
SP_SET_PARA_VALUE(2,'ENABLE_ENCRYPT',      0);
SP_SET_PARA_VALUE(2,'OLAP_FLAG',           2);
SP_SET_PARA_VALUE(2,'VIEW_PULLUP_FLAG',    1);
SP_SET_PARA_VALUE(2,'OPTIMIZER_MODE',      1);
SP_SET_PARA_VALUE(2,'ADAPTIVE_NPLN_FLAG',  0);
SP_SET_PARA_VALUE(2,'PARALLEL_PURGE_FLAG', 1);
SP_SET_PARA_VALUE(2,'PARALLEL_POLICY',     2);
SP_SET_PARA_VALUE(2,'UNDO_EXTENT_NUM',    16);
SP_SET_PARA_VALUE(2,'ENABLE_INJECT_HINT',  1);
SP_SET_PARA_VALUE(2,'BTR_SPLIT_MODE',      1);
SP_SET_PARA_VALUE(2,'FAST_LOGIN',          1);
SP_SET_PARA_VALUE(1,'SVR_LOG',             1);
SP_SET_PARA_VALUE(2,'ENABLE_LOCAL_OSAUTH', 1);
SP_SET_PARA_VALUE(2,'MULTI_PAGE_GET_NUM',16);
SP_SET_PARA_VALUE(2,'PRELOAD_SCAN_NUM',  4);
SP_SET_PARA_VALUE(2,'PRELOAD_EXTENT_NUM',5);
SP_SET_PARA_VALUE(2,'DSC_N_POOLS',2);
SP_SET_PARA_VALUE(2,'DSC_GBS_REVOKE_OPT',0);
SP_SET_PARA_VALUE(2,'DSC_HALT_SYNC',     0);
SP_SET_PARA_VALUE(2,'DSC_N_CTLS',    50000);
SP_SET_PARA_VALUE(2,'DSC_ENABLE_MONITOR',0);
SP_SET_PARA_VALUE(2,'TRX_DICT_LOCK_NUM', 5);
SP_SET_PARA_VALUE(2,'ENABLE_FREQROOTS',  0);
SP_SET_PARA_VALUE(2,'DIRECT_IO',         1);

MEMORY_TARGET+BUFFER+RECYCLE+HJ_BUF_GLOBAL_SIZE+HAGR_BUF_GLOBAL_SIZE+CACHE_POOL_SIZE+DICT_BUF_SIZE+SORT_BUF_GLOBAL_SIZE+RLOG_POO
--------------------------------------------------------------------------------------------------------------------------------
3086

重启数据库，优化参数生效

关闭数据库

[monitor]         2022-12-28 21:47:17: CSS MONITOR V8
[monitor]         2022-12-28 21:47:17: CSS MONITOR SYSTEM IS READY.

[monitor]         2022-12-28 21:47:17: Wait CSS Control Node choosed...
[monitor]         2022-12-28 21:47:18: Wait CSS Control Node choosed succeed.

[monitor]         2022-12-28 21:47:18: 组(GRP_DMDSC)中节点对应的CSS自动拉起标记已经处于关闭状态

[monitor]         2022-12-28 21:47:18: 通知CSS(seqno:0)执行EP STOP(GRP_DMDSC)
[monitor]         2022-12-28 21:47:25: 通知当前活动的CSS执行清理操作
[monitor]         2022-12-28 21:47:26: 清理CSS(0)请求成功
[monitor]         2022-12-28 21:47:26: 清理CSS(1)请求成功
[monitor]         2022-12-28 21:47:26: 命令EP STOP GRP_DMDSC执行成功

启动数据库

[monitor]         2022-12-28 21:47:32: CSS MONITOR V8
[monitor]         2022-12-28 21:47:32: CSS MONITOR SYSTEM IS READY.

[monitor]         2022-12-28 21:47:32: Wait CSS Control Node choosed...
[monitor]         2022-12-28 21:47:34: Wait CSS Control Node choosed succeed.

[monitor]         2022-12-28 21:47:34: 通知CSS(seqno:0)执行EP STARTUP(DMDSC0)
[monitor]         2022-12-28 21:47:42: 通知CSS(seqno:0)执行EP STARTUP(DMDSC0)成功
[monitor]         2022-12-28 21:47:42: 通知CSS(seqno:1)执行EP STARTUP(DMDSC1)
[monitor]         2022-12-28 21:47:53: 通知CSS(seqno:1)执行EP STARTUP(DMDSC1)成功
[monitor]         2022-12-28 21:47:53: 通知CSS(seqno:0)打开节点(DMDSC0)的自动拉起功能
[monitor]         2022-12-28 21:47:54: 通知CSS(seqno:0)打开节点(DMDSC0)的自动拉起功能成功
[monitor]         2022-12-28 21:47:54: 通知CSS(seqno:1)打开节点(DMDSC1)的自动拉起功能
[monitor]         2022-12-28 21:47:54: 通知CSS(seqno:1)打开节点(DMDSC1)的自动拉起功能成功
[monitor]         2022-12-28 21:47:54: 打开CSS自动拉起功能成功
[monitor]         2022-12-28 21:47:54: 通知当前活动的CSS执行清理操作
[monitor]         2022-12-28 21:47:55: 清理CSS(0)请求成功
[monitor]         2022-12-28 21:47:55: 清理CSS(1)请求成功
[monitor]         2022-12-28 21:47:55: 命令EP STARTUP GRP_DMDSC执行成功


#==============================================================#
创建DMDBA用户，密码：SYSDBA
#==============================================================#

密钥过期时间：2023-11-21

USERNAME
----------
SYSAUDITOR
SYSSSO
SYSDBA
DMDBA
SYS

#==============================================================#
查询数据库优化结果：
#==============================================================#

密钥过期时间：2023-11-21

PARA_NAME             DEFAULT_VALUE PARA_VALUE
--------------------- ------------- ----------
MAX_OS_MEMORY         100           80
MAX_SESSION_STATEMENT 10000         20000
TRX_VIEW_MODE         1             1
MAX_SESSIONS          10000         1500
IO_THR_GROUPS         8             2
ADAPTIVE_NPLN_FLAG    3             0
OPTIMIZER_MODE        1             1
TOP_DIS_HASH_FLAG     1             1
TOP_ORDER_OPT_FLAG    0             0
VIEW_PULLUP_FLAG      0             1
USE_PLN_POOL          1             1
TASK_THREADS          16            16
WORKER_THREADS        16            1
SESS_POOL_TARGET      16384         16384
SESS_POOL_SIZE        64            64
VM_POOL_TARGET        16384         16384
DICT_BUF_SIZE         50            50
HAGR_BUF_SIZE         500           50
HAGR_BUF_GLOBAL_SIZE  5000          1000
HJ_BUF_SIZE           500           50
HJ_BUF_GLOBAL_SIZE    5000          1000
SORT_FLAG             0             0
SORT_BUF_GLOBAL_SIZE  1000          500
SORT_BLK_SIZE         1             1
SORT_BUF_SIZE         20            2
MAX_BUFFER            1000          1000
RECYCLE_POOLS         3             1
RECYCLE               300           80
BUFFER_POOLS          9             3
BUFFER                1000          1000
MEMORY_MAGIC_CHECK    1             1
MEMORY_TARGET         15000         0
MEMORY_N_POOLS        1             2
MEMORY_POOL           500           100
PK_WITH_CLUSTER       0             0
ENABLE_MONITOR        1             1
SVR_LOG               0             1
DATETIME_FMT_MODE     0             0
COMPATIBLE_MODE       0             0
CLOB_LIKE_MAX_LEN     10240         10240
ENABLE_ENCRYPT        0             0
REDOS_PARALLEL_NUM    1             1
RLOG_POOL_SIZE        256           256
CACHE_POOL_SIZE       100           200
TEMP_SPACE_LIMIT      0             102400
TEMP_SIZE             10            1024
OLAP_FLAG             2             2

恭喜您，达梦数据库DMDSC已经安装完成！
[root@centos7 soft]#
[root@centos7 soft]#
[root@centos7 soft]# su - dmdba
[dmdba@dsc01:~]$ dmcssm /dm/dm
dmbak/  dmdata/ dmdbms/
[dmdba@dsc01:~]$ dmcssm /dm/dmdata/DMDSC/
asmdisk.txt    dmasvrmal.ini  dmcssm.ini     dmdcr_cfg.ini  dmdcr.ini      dmdsc0_config/ dmdsc1_config/ dminit.ini
[dmdba@dsc01:~]$ dmcssm /dm/dmdata/DMDSC/dmcssm.ini
[monitor]         2022-12-28 21:48:57: CSS MONITOR V8
[monitor]         2022-12-28 21:48:57: CSS MONITOR SYSTEM IS READY.

[monitor]         2022-12-28 21:48:57: Wait CSS Control Node choosed...
[monitor]         2022-12-28 21:48:58: Wait CSS Control Node choosed succeed.

show

monitor current time:2022-12-28 21:48:59, n_group:3
=================== group[name = GRP_CSS, seq = 0, type = CSS, Control Node = 0] ========================================

[CSS0] auto check = TRUE, global info:
[ASM0] auto restart = FALSE
[DMDSC0] auto restart = TRUE
[CSS1] auto check = TRUE, global info:
[ASM1] auto restart = FALSE
[DMDSC1] auto restart = TRUE

ep:	css_time               inst_name     seqno     port    mode         inst_status        vtd_status   is_ok        active       guid              ts
	2022-12-28 21:48:59    CSS0          0         12346   Control Node OPEN               WORKING      OK           TRUE         528676            528959
	2022-12-28 21:48:59    CSS1          1         12346   Normal Node  OPEN               WORKING      OK           TRUE         535490            535753

=================== group[name = GRP_ASM, seq = 1, type = ASM, Control Node = 0] ========================================

n_ok_ep = 2
ok_ep_arr(index, seqno):
(0, 0)
(1, 1)

sta = OPEN, sub_sta = STARTUP
break ep = NULL
recover ep = NULL

crash process over flag is TRUE
ep:	css_time               inst_name     seqno     port    mode         inst_status        vtd_status   is_ok        active       guid              ts
	2022-12-28 21:48:59    ASM0          0         12345   Control Node OPEN               WORKING      OK           TRUE         543245            543485
	2022-12-28 21:48:59    ASM1          1         12345   Normal Node  OPEN               WORKING      OK           TRUE         550042            550262

=================== group[name = GRP_DMDSC, seq = 2, type = DB, Control Node = 0] ========================================

n_ok_ep = 2
ok_ep_arr(index, seqno):
(0, 0)
(1, 1)

sta = OPEN, sub_sta = STARTUP
break ep = NULL
recover ep = NULL

crash process over flag is TRUE
ep:	css_time               inst_name     seqno     port    mode         inst_status        vtd_status   is_ok        active       guid              ts
	2022-12-28 21:48:59    DMDSC0        0         5236    Control Node OPEN               WORKING      OK           TRUE         1290850           1290926
	2022-12-28 21:48:59    DMDSC1        1         5236    Normal Node  OPEN               WORKING      OK           TRUE         1298275           1298341

==================================================================================================================

exit
[dmdba@dsc01:~]$ exit
登出
[root@centos7 soft]#
[root@centos7 soft]#

[END] 2022/12/28 14:59:04