同步操作将从 OpenHarmony/docs 强制同步,此操作会覆盖自 Fork 仓库以来所做的任何修改,且无法恢复!!!
确定后同步将在后台操作,完成时将刷新页面,请耐心等待。
本章节讲解如何移植各类器件驱动。
移植LCD驱动的主要工作是编写一个驱动,在驱动中生成模型的实例,并完成注册。
这些LCD的驱动被放置在源码目录//drivers/framework/model/display/driver/panel中。
创建Panel驱动 创建HDF驱动,在驱动初始化中调用RegisterPanel接口注册模型实例。如:
int32_t LCDxxEntryInit(struct HdfDeviceObject *object)
{
struct PanelData *panel = CreateYourPanel();
// 注册模型实例
if (RegisterPanel(panel) != HDF_SUCCESS) {
HDF_LOGE("%s: RegisterPanel failed", __func__);
return HDF_FAILURE;
}
return HDF_SUCCESS;
}
struct HdfDriverEntry g_xxxxDevEntry = {
.moduleVersion = 1,
.moduleName = "LCD_XXXX",
.Init = LCDxxEntryInit,
};
HDF_INIT(g_xxxxDevEntry);
配置加载panel驱动 产品的所有设备信息被定义在源码文件//vendor/vendor_name/product_name/config/device_info/device_info.hcs中。修改该文件,在display的host中,名为device_lcd的device中增加配置。
注意: moduleName 要与panel驱动中的moduleName相同。
root {
...
display :: host {
device_lcd :: device {
deviceN :: deviceNode {
policy = 0;
priority = 100;
preload = 2;
moduleName = "LCD_XXXX";
}
}
}
}
本节描述如何移植触摸屏驱动。触摸屏的器件驱动被放置在源码目录//drivers/framework/model/input/driver/touchscreen中。 移植触摸屏驱动主要工作是向系统注册ChipDevice模型实例。
详细的驱动开发指导,请参考 TOUCHSCREEN开发指导。
创建触摸屏器件驱动 在上述touchscreen目录中创建名为touch_ic_name.c的文件。编写如下内容
#include "hdf_touch.h"
static int32_t HdfXXXXChipInit(struct HdfDeviceObject *device)
{
ChipDevice *tpImpl = CreateXXXXTpImpl();
if(RegisterChipDevice(tpImpl) != HDF_SUCCESS) { // 注册ChipDevice模型
ReleaseXXXXTpImpl(tpImpl);
return HDF_FAILURE;
}
return HDF_SUCCESS;
}
struct HdfDriverEntry g_touchXXXXChipEntry = {
.moduleVersion = 1,
.moduleName = "HDF_TOUCH_XXXX", // 注意这里的moduleName要与后续的配置完全一致
.Init = HdfXXXXChipInit,
};
HDF_INIT(g_touchXXXXChipEntry);
其中ChipDevice中要实现如下方法:
方法 | 实现说明 |
---|---|
int32_t (*Init)(ChipDevice *device) | 实现器件初始化 |
int32_t (*Detect)(ChipDevice *device) | 实现器件探测 |
int32_t (*Suspend)(ChipDevice *device) | 实现器件休眠 |
int32_t (*Resume)(ChipDevice *device) | 实现器件唤醒 |
int32_t (*DataHandle)(ChipDevice *device) | 需要实现从器件读取数据,将触摸点数据填写入device->driver->frameData中 |
int32_t (*UpdateFirmware)(ChipDevice *device) | 实现固件升级 |
配置产品,加载器件驱动 产品的所有设备信息被定义在源码文件//vendor/vendor_name/product_name/config/device_info/device_info.hcs中。修改该文件,在名为input的host中,名为device_touch_chip的device中增加配置。
说明: moduleName 要与触摸屏驱动中的moduleName相同。
deviceN :: deviceNode {
policy = 0;
priority = 130;
preload = 0;
permission = 0660;
moduleName = "HDF_TOUCH_XXXX";
deviceMatchAttr = "touch_XXXX_configs";
}
WLAN驱动分为两部分,一部分负责管理WLAN设备,另一个部分负责处理WLAN流量。
图1 OpenHarmony WLAN结构示意图
如图1,左半部分负责管理WLAN设备,右半部分负责WLAN流量。HDF WLAN分别为这两部分做了抽象,驱动的移植过程可以看做分别实现这两部分所需接口。这些接口有:
接口 | 定义头文件 | 接口说明 |
---|---|---|
HdfChipDriverFactory | drivers\framework\include\wifi\hdf_wlan_chipdriver_manager.h | ChipDriver的Factory,用于支持一个芯片多个WLAN端口 |
HdfChipDriver | drivers\framework\include\wifi\wifi_module.h | 每个WLAN端口对应一个HdfChipDriver,用来管理一个特定端口 |
NetDeviceInterFace | drivers\framework\include\wifi\net_device.h | 与协议栈之间的接口,如发送数据、设置网络接口状态等 |
说明: 详细的接口开发指导,请参考WLAN开发。
具体的移植步骤如下:
创建HDF WLAN 芯片驱动 在目录/device/vendor_name/peripheral/wifi/chip_name/ 创建文件 hdf_wlan_chip_name.c。内容模板如下:
static int32_t HdfWlanHisiChipDriverInit(struct HdfDeviceObject *device) {
static struct HdfChipDriverFactory factory = CreateChipDriverFactory(); // 需要移植者实现的方法
struct HdfChipDriverManager *driverMgr = HdfWlanGetChipDriverMgr();
if (driverMgr->RegChipDriver(&factory) != HDF_SUCCESS) { // 注册驱动工厂
HDF_LOGE("%s fail: driverMgr is NULL!", __func__);
return HDF_FAILURE;
}
return HDF_SUCCESS;
}
struct HdfDriverEntry g_hdfXXXChipEntry = {
.moduleVersion = 1,
.Init = HdfWlanXXXChipDriverInit,
.Release = HdfWlanXXXChipRelease,
.moduleName = "HDF_WIFI_CHIP_XXX" // 注意:这个名字要与配置一致
};
HDF_INIT(g_hdfXXXChipEntry);
在上述代码的CreateChipDriverFactory方法中,需要创建一个HdfChipDriverFactory类型的对象。该对象提供如下方法
接口 | 说明 |
---|---|
const char *driverName | 当前driverName |
int32_t (*InitChip)(struct HdfWlanDevice *device) | 初始化芯片 |
int32_t (*DeinitChip)(struct HdfWlanDevice *device) | 去初始化芯片 |
void (*ReleaseFactory)(struct HdfChipDriverFactory *factory) | 释放HdfChipDriverFactory对象 |
struct HdfChipDriver *(*Build)(struct HdfWlanDevice *device, uint8_t ifIndex) | 创建一个HdfChipDriver;输入参数中,device是设备信息,ifIndex是当前创建的接口在这个芯片中的序号 |
void (*Release)(struct HdfChipDriver *chipDriver) | 释放chipDriver |
uint8_t (*GetMaxIFCount)(struct HdfChipDriverFactory *factory) | 获取当前芯片支持的最大接口数 |
其中Build方法负责创建一个管理指定网络接口的对象HdfChipDriver 。该对象需要提供方法:
接口 | 说明 |
---|---|
int32_t (*init)(struct HdfChipDriver *chipDriver, NetDevice *netDev) | 初始化当前网络接口,这里需要向netDev提供接口NetDeviceInterFace |
int32_t (*deinit)(struct HdfChipDriver *chipDriver, NetDevice *netDev) | 去初始化当前网络接口 |
struct HdfMac80211BaseOps *ops | WLAN基础能力接口集 |
struct HdfMac80211STAOps *staOps | 支持STA模式所需的接口集 |
struct HdfMac80211APOps *apOps | 支持AP模式所需要的接口集 |
编写配置文件描述驱动支持的芯片 在产品配置目录下创建芯片的配置文件,保存至源码路径//vendor/vendor_name/product_name/config/wifi/wlan_chip_chip_name.hcs
该文件模板如下:
root {
wlan_config {
chip_name :& chipList {
chip_name :: chipInst {
match_attr = "hdf_wlan_chips_chip_name"; /* 这是配置匹配属性,用于提供驱动的配置根 */
driverName = "driverName"; /* 需要与HdfChipDriverFactory中的driverName相同*/
sdio {
vendorId = 0xXXXX; /* your vendor id */
deviceId = [0xXXXX]; /*your supported devices */
}
}
}
}
}
说明: 路径和文件中的vendor_name、product_name、chip_name请替换成实际名称
vendorId 和 deviceId需要根据实际芯片的识别码进行填写。
编写配置文件,加载驱动 产品的所有设备信息被定义在源码文件//vendor/vendor_name/product_name/config/device_info/device_info.hcs中。修改该文件,在名为network的host中,名为device_wlan_chips的device中增加配置。模板如下:
deviceN :: deviceNode {
policy = 0;
preload = 2;
moduleName = "HDF_WLAN_CHIPS";
deviceMatchAttr = "hdf_wlan_chips_chip_name";
serviceName = "driverName";
}
说明: moduleName 要与HDF WLAN 芯片驱动中的moduleName相同。
修改Kconfig文件,让移植的WLAN模组出现再内核配置中 在device/vendor_name/drivers/Kconfig中增加配置菜单,模板如下
config DRIVERS_HDF_WIFI_chip_name
bool "Enable chip_name Host driver"
default n
depends on DRIVERS_HDF_WLAN help
Answer Y to enable chip_name Host driver.
说明: 请替换模板中的chip_name为实际的芯片名称
修改构建脚本,让驱动参与内核构建 在源码文件//device/vendor_name/drivers/lite.mk末尾追加如下内容
ifeq ($(LOSCFG_DRIVERS_HDF_WIFI_chip_name), y)
# 构建完成要链接一个叫hdf_wlan_chipdriver_chip_name的对象,建议按这个命名,防止冲突
LITEOS_BASELIB += -lhdf_wlan_chipdriver_chip_name
# 增加构建目录gpio
LIB_SUBDIRS += ../peripheral/wifi/chip_name
endif
说明: 请替换模板中的chip_name为实际的芯片名称
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。