pyOCD is an open source Python package for programming and debugging Arm Cortex-M microcontrollers using multiple supported types of USB debug probes. It is fully cross-platform, with support for Linux, macOS, and Windows.
A command line tool is provided that covers most use cases, or you can make use of the Python API to enable low-level target control. A common use for the Python API is to run and control CI tests.
Upwards of 70 popular MCUs are supported built-in. In addition, through the use of CMSIS-Packs, nearly every Cortex-M device on the market is supported.
The pyocd
command line tool gives you total control over your device with these subcommands:
gdbserver
: GDB remote server allows you to debug using gdb via either the console or
several GUI debugger options.flash
: Program files of various formats into flash memory.erase
: Erase part or all of an MCU's flash memory.pack
: Manage CMSIS Device Family Packs
that provide additional target device support.commander
: Interactive REPL control and inspection of the MCU.server
: Share a debug probe with a TCP/IP server.list
: Show connected devices.The API and tools provide these features:
Configuration and customization is supported through config files, user scripts, and the Python API.
PyOCD has moved to its own organization on GitHub! You will continue to see further changes to increase communication and make pyOCD a more independent and open project.
Important note: Python 2 support is deprecated and is planned to be dropped from an upcoming release. Existing releases of pyOCD will, of course, continue to work with Python 2. If this is a major problem for you moving forward, please create a new issue describing your concerns.
PyOCD is functionally reliable and fully useable.
The Python API is considered partially unstable as we are restructuring and cleaning it up prior to releasing version 1.0.
The pyOCD documentation is located in the docs directory.
In addition to user guides, you can generate reference documentation using Doxygen with the supplied config file.
The latest stable version of pyOCD may be installed via pip as follows:
$ pip install -U pyocd
The latest pyOCD package is available on PyPI as well as on GitHub.
To install the latest prerelease version from the HEAD of the master branch, you can do the following:
$ pip install --pre -U git+https://github.com/mbedmicro/pyOCD.git
You can also install directly from the source by cloning the git repository and running:
$ python setup.py install
Note that, depending on your operating system, you may run into permissions issues running these commands. You have a few options here:
sudo -H
to install pyOCD and dependencies globally. (Installing with sudo
should never be required for macOS.)--user
option to install local to your user.For notes about installing and using on non-x86 systems such as Raspberry Pi, see the relevant documentation.
pyusb and its backend library libusb are dependencies on all supported operating systems. pyusb is a regular Python package and will be installed along with pyOCD. However, libusb is a binary shared library that does not get installed automatically via pip dependency management.
How to install libusb depends on your OS:
brew install libusb
On Linux, particularly Ubuntu 16.04+, you must configure udev rules to allow pyOCD to access debug probes from user space. Otherwise you will need to run pyOCD as root, using sudo, which is very highly discouraged. (You should never run pyOCD as root on any OS.)
To help with this, example udev rules files are included with pyOCD in the udev folder. The readme in this folder has detailed instructions.
See the target support documentation for information on how to check if the MCU(s) you are using have built-in support, and how to install support for additional MCUs via CMSIS-Packs.
After you install pyOCD via pip or setup.py, you will be able to execute the following in order to start a GDB server powered by pyOCD:
$ pyocd gdbserver
You can get additional help by running pyocd gdbserver --help
.
Example command line GDB session showing how to connect to a running pyocd gdbserver
and load
firmware:
$ arm-none-eabi-gdb application.elf
<gdb> target remote localhost:3333
<gdb> load
<gdb> monitor reset
The pyocd gdbserver
subcommand is also usable as a drop in place replacement for OpenOCD in
existing setups. The primary difference is the set of gdb monitor commands.
The recommended toolchain for embedded Arm Cortex-M development is GNU Arm Embedded, provided by Arm. GDB is included with this toolchain.
For Visual Studio Code, the cortex-debug plugin is available that supports pyOCD.
The GDB server also works well with Eclipse Embedded CDT, previously known as GNU MCU/ARM Eclipse. It fully supports pyOCD with an included pyOCD debugging plugin.
To view peripheral register values either the built-in Eclipse Embedded CDT register view can be used, or
the Embedded System Register Viewer plugin can be installed. The latter can be installed from inside
Eclipse adding http://embsysregview.sourceforge.net/update
as a software update server URL
under the "Help -> Install New Software..." menu item.
Please see the Developers' Guide for instructions on how to set up a development environment for pyOCD.
We welcome contributions to pyOCD in any area. Please see the contribution guidelines for detailed requirements for contributions.
To report bugs, please create an issue in the GitHub project.
PyOCD is licensed with the permissive Apache 2.0 license. See the LICENSE file for the full text of the license.
Copyright © 2006-2020 Arm Ltd and others (see individual source files)
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。