代码拉取完成，页面将自动刷新
PHP-rdkafka is the most stable, production-ready, long term support, and fast Kafka client for PHP based on librdkafka.
It supports PHP 7, PHP 8 (and even PHP 5 in older versions) as well as all librdkafka versions since 0.11, and all Kafka versions since 0.8. This makes it easy to deploy the extension in production systems.
The goal of the extension is to be a raw, un-opinionated, librdkafka binding focused on production and long term support.
The high level and low level consumers, producer, and metadata APIs are supported.
Documentation is available here.
https://arnaud-lb.github.io/php-rdkafka-doc/phpdoc/rdkafka.setup.html
https://arnaud-lb.github.io/php-rdkafka-doc/phpdoc/rdkafka.examples.html
Configuration parameters used below can found in Librdkafka Configuration reference
For producing, we first need to create a producer, and to add brokers (Kafka servers) to it:
<?php
$conf = new RdKafka\Conf();
$conf->set('log_level', (string) LOG_DEBUG);
$conf->set('debug', 'all');
$rk = new RdKafka\Producer($conf);
$rk->addBrokers("10.0.0.1:9092,10.0.0.2:9092");
Make sure that your producer follows proper shutdown (see below) to not lose messages.
Next, we create a topic instance from the producer:
<?php
$topic = $rk->newTopic("test");
From there, we can produce as much messages as we want, using the produce method:
<?php
$topic->produce(RD_KAFKA_PARTITION_UA, 0, "Message payload");
The first argument is the partition. RD_KAFKA_PARTITION_UA stands for
unassigned, and lets librdkafka choose the partition.
The second argument are message flags and should be either 0
or RD_KAFKA_MSG_F_BLOCK to block produce on full queue.
The message payload can be anything.
This should be done prior to destroying a producer instance
to make sure all queued and in-flight produce requests are completed
before terminating. Use a reasonable value for $timeout_ms.
Not calling flush can lead to message loss!
$rk->flush($timeout_ms);
In case you don't care about sending messages that haven't been sent yet,
you can use purge() before calling flush():
// Forget messages that are not fully sent yet
$rk->purge(RD_KAFKA_PURGE_F_QUEUE);
$rk->flush($timeout_ms);
The RdKafka\KafkaConsumer class supports automatic partition assignment/revocation. See the example here.
The low-level consumer is a legacy API, please prefer using the high-level consumer
We first need to create a low level consumer, and to add brokers (Kafka servers) to it:
<?php
$conf = new RdKafka\Conf();
$conf->set('log_level', (string) LOG_DEBUG);
$conf->set('debug', 'all');
$rk = new RdKafka\Consumer($conf);
$rk->addBrokers("10.0.0.1,10.0.0.2");
Next, create a topic instance by calling the newTopic() method, and start
consuming on partition 0:
<?php
$topic = $rk->newTopic("test");
// The first argument is the partition to consume from.
// The second argument is the offset at which to start consumption. Valid values
// are: RD_KAFKA_OFFSET_BEGINNING, RD_KAFKA_OFFSET_END, RD_KAFKA_OFFSET_STORED.
$topic->consumeStart(0, RD_KAFKA_OFFSET_BEGINNING);
Next, retrieve the consumed messages:
<?php
while (true) {
// The first argument is the partition (again).
// The second argument is the timeout.
$msg = $topic->consume(0, 1000);
if (null === $msg || $msg->err === RD_KAFKA_RESP_ERR__PARTITION_EOF) {
// Constant check required by librdkafka 0.11.6. Newer librdkafka versions will return NULL instead.
continue;
} elseif ($msg->err) {
echo $msg->errstr(), "\n";
break;
} else {
echo $msg->payload, "\n";
}
}
Consuming from multiple topics and/or partitions can be done by telling librdkafka to forward all messages from these topics/partitions to an internal queue, and then consuming from this queue:
Creating the queue:
<?php
$queue = $rk->newQueue();
Adding topic partitions to the queue:
<?php
$topic1 = $rk->newTopic("topic1");
$topic1->consumeQueueStart(0, RD_KAFKA_OFFSET_BEGINNING, $queue);
$topic1->consumeQueueStart(1, RD_KAFKA_OFFSET_BEGINNING, $queue);
$topic2 = $rk->newTopic("topic2");
$topic2->consumeQueueStart(0, RD_KAFKA_OFFSET_BEGINNING, $queue);
Next, retrieve the consumed messages from the queue:
<?php
while (true) {
// The only argument is the timeout.
$msg = $queue->consume(1000);
if (null === $msg || $msg->err === RD_KAFKA_RESP_ERR__PARTITION_EOF) {
// Constant check required by librdkafka 0.11.6. Newer librdkafka versions will return NULL instead.
continue;
} elseif ($msg->err) {
echo $msg->errstr(), "\n";
break;
} else {
echo $msg->payload, "\n";
}
}
librdkafka per default stores offsets on the broker.
If you're using local file for offset storage, then by default the file is created in the current directory, with a
name based on the topic and the partition. The directory can be changed by setting the offset.store.path
configuration property.
To manually control the offset, set enable.auto.offset.store to false.
The settings auto.commit.interval.ms and auto.commit.enable will control
if the stored offsets will be auto committed to the broker and in which interval.
To manually control the offset, set enable.auto.commit to false.
Maximum allowed time between calls to consume messages for high-level consumers.
If this interval is exceeded the consumer is considered failed and the group will
rebalance in order to reassign the partitions to another consumer group member.
group.id is responsible for setting your consumer group ID and it should be unique (and should
not change). Kafka uses it to recognize applications and store offsets for them.
<?php
$topicConf = new RdKafka\TopicConf();
$topicConf->set("auto.commit.interval.ms", 1e3);
$topic = $rk->newTopic("test", $topicConf);
$topic->consumeStart(0, RD_KAFKA_OFFSET_STORED);
Librdkafka Configuration reference
librdkafka will buffer up to 1GB of messages for each consumed partition by default. You can lower memory usage by reducing the value of the queued.max.messages.kbytes parameter on your consumers.
Each consumer and producer instance will fetch topics metadata at an interval defined by the topic.metadata.refresh.interval.ms parameter. Depending on your librdkafka version, the parameter defaults to 10 seconds, or 600 seconds.
librdkafka fetches the metadata for all topics of the cluster by default. Setting topic.metadata.refresh.sparse to the string "true" makes sure that librdkafka fetches only the topics he uses.
Setting topic.metadata.refresh.sparse to "true", and topic.metadata.refresh.interval.ms to 600 seconds (plus some jitter) can reduce the bandwidth a lot, depending on the number of consumers and topics.
This setting allows librdkafka threads to terminate as soon as librdkafka is done with them. This effectively allows your PHP processes / requests to terminate quickly.
When enabling this, you have to mask the signal like this:
<?php
// once
pcntl_sigprocmask(SIG_BLOCK, array(SIGIO));
// any time
$conf->set('internal.termination.signal', SIGIO);
Maximum time a broker socket operation may block. A lower value improves responsiveness at the expense of slightly higher CPU usage.
Reducing the value of this setting improves shutdown speed. The value defines the maximum time librdkafka will block in one iteration of a read loop. This also defines how often the main librdkafka thread will check for termination.
This defines the maximum and default time librdkafka will wait before sending a batch of messages. Reducing this setting to e.g. 1ms ensures that messages are sent ASAP, instead of being batched.
This has been seen to reduce the shutdown time of the rdkafka instance, and of the PHP process / request.
Here is a configuration optimized for low latency. This allows a PHP process / request to send messages ASAP and to terminate quickly.
<?php
$conf = new \RdKafka\Conf();
$conf->set('socket.timeout.ms', 50); // or socket.blocking.max.ms, depending on librdkafka version
if (function_exists('pcntl_sigprocmask')) {
pcntl_sigprocmask(SIG_BLOCK, array(SIGIO));
$conf->set('internal.termination.signal', SIGIO);
} else {
$conf->set('queue.buffering.max.ms', 1);
}
$producer = new \RdKafka\Producer($conf);
$consumer = new \RdKafka\Consumer($conf);
It is advised to call poll at regular intervals to serve callbacks. In php-rdkafka:3.x
poll was also called during shutdown, so not calling it in regular intervals might
lead to a slightly longer shutdown. The example below polls until there are no more events in the queue:
$producer->produce(...);
while ($producer->getOutQLen() > 0) {
$producer->poll(1);
}
https://arnaud-lb.github.io/php-rdkafka-doc/phpdoc/book.rdkafka.html
The source of the documentation can be found here
If the documentation is not enough, feel free to ask a questions on the php-rdkafka channels on Gitter or Google Groups.
Because your IDE is not able to auto discover php-rdkadka api you can consider usage of external package providing a set of stubs for php-rdkafka classes, functions and constants: kwn/php-rdkafka-stubs
If you would like to contribute, thank you :)
Before you start, please take a look at the CONTRIBUTING document to see how to get your changes merged in.
Documentation copied from librdkafka.
Authors: see contributors.
php-rdkafka is released under the MIT license.
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。