代码拉取完成,页面将自动刷新
- If you want to support S5 WOL, you have to find EXTRA_CFLAGS += -DRTL8152_S5_WOL in the Makefile. Then, remove the first character '#", if it exists. - For Fedora, you may have to run the following command after installing the driver. # dracut -f - For Ubuntu, you may have to run the following command after installing the driver. # sudo depmod -a # sudo update-initramfs -u - Example of setting speed 2.5G before kernel v4.10 # ethtool -s eth0 autoneg on advertise 0x802f 2.5G for kernel v4.10 and later # ethtool -s eth0 autoneg on advertise 0x80000000002f # ethtool -s eth0 autoneg on advertise 0x002f (1G) # ethtool -s eth0 autoneg on advertise 0x000f (100M full) # ethtool -s eth0 autoneg on advertise 0x0003 (10M full) - Disable center tap short # make CONFIG_CTAP_SHORT=OFF modules - Ring parameter Show Ring parameter # ethtool -g eth0 Changes the number of ring entries for the Rx ring. # ethtool -G eth0 rx 100
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。